Tài liệu miễn phí Tự động hoá
Download Tài liệu học tập miễn phí Tự động hoá
Control Systems Simulation using Matlab and Simulink
Control Systems Simulation Using Matlab and Simulink
8/29/2018 4:57:42 PM +00:00
Robotics TOOLBOX
This Toolbox provides many functions that are useful in robotics including such things as kinematics, dynamics, and trajectory generation. The Toolbox is useful for simulation as well as analyzing results from experiments with real robots. The Toolbox has been developed and used over the last few years to the point where I now rarely write ‘C’ code for these kinds of tasks.
8/29/2018 4:57:42 PM +00:00
Decibel
The Decibel is a subunit of a larger unit called the bel. As originally used, the bel represented the power ratio of 10 to 1 between the strength or intensity i.e., power, of two sounds, and was named after Alexander Graham Bell. Thus a power ratio of 10:1 = 1 bel, 100:1 = 2 bels, and 1000:1 = 3 bels.
8/29/2018 4:57:42 PM +00:00
Design And Simulation Of A Cmos-Mems Accelerometer
Design and Simulation of A CMOS-MEMS Accelerometer
8/29/2018 4:57:42 PM +00:00
Design of a Powerline Home Automation System
This report describes work that I did on embedded control data communication using the domestic powerline circuitry as channel medium. A home automation system was implemented. In the modern home filled with electronic apparatus and appliances, it is useful for the owner to exercise some form of centralised control over the functions in the house. Currently, when the owner needs to turn on the driveway and living room lights before arming the alarm and going to bed, he has to walk to the garage, then to the front door, then to the alarm box, then to bed....
8/29/2018 4:57:42 PM +00:00
Detector
A detector is used in receiver circuits to recognize the presence of signals. Typically a diode or similar device is used as a detector.
8/29/2018 4:57:42 PM +00:00
Development of Observe By WireSystemforForkliftsUsingHapticInterface
Development of an Observe-By-Wire System for Forklifts Using Haptic Interfaces
8/29/2018 4:57:42 PM +00:00
MIPS Assembly Language Programming 2003 Prentice-Hall
This book is targeted for use in an introductory lower-division assembly languageprogramming or computer organization course. After students are introduced to the MIPSarchitecture using this book, they will be well prepared to go on to an upper-division computer organization course using a textbook such as “Computer Organization and Design” by Patterson and Hennessy. This book provides a technique that will make MIPS assembly language programming a relatively easy task as compared to writing complex.Intel 80x86 assembly language code. Students using this book will acquire an understanding of how the functional components of computers are put together, and how a computer...
8/29/2018 4:57:28 PM +00:00
Neural network induction graph for pattern recognition
Neural network induction graph for pattern recognition
8/29/2018 4:57:28 PM +00:00
NS5
NS-series HMIs Navigate All Areas of Machine Operation, From Daily Operation to Error Recovery
8/29/2018 4:57:28 PM +00:00
NS5 NS8 NS10 NS12
Tham khảo tài liệu 'ns5 ns8 ns10 ns12', kỹ thuật - công nghệ, tự động hoá phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả
8/29/2018 4:57:28 PM +00:00
Office Automation with VBA (Office 97 & 2000)
This document is intended as an introductory guide to the development of customised applications using Microsoft Office 97 or Office 2000. We concentrate on using the Excel application, although the general skills gained are equally applicable to the other Office applications. It is not an exhaustive review of all of the features of these two packages - there are too many! I hope, however, to be able to describe the essential features of programming in Visual Basic for Applications (VBA) and to illustrate some of its capabilities by means of a range of illustrative examples....
8/29/2018 4:57:28 PM +00:00
PC Assembly Language
The purpose of this book is to give the reader a better understanding of how computers really work at a lower level than in programming languages like Pascal. By gaining a deeper understanding of how computers work, the reader can often be much more productive developing software in higher level languages such as C and C++. Learning to program in assembly language is an excellent way to achieve this goal. Other PC assembly language books still teach how to program the 8086 processor that the original PC used in 1980! This book instead discusses how to program the 80386 and later...
8/29/2018 4:57:28 PM +00:00
Programming Serial and Parallel Ports
Programming Serial and Parallel Ports
8/29/2018 4:57:28 PM +00:00
Programming the Parallel Port
Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where R&D is aware of a trademark claim, the product name appears in initial capital letters, in all capital letters, or in accordance with the vendor's capitalization preference. Readers should contact the appropriate companies for more complete information on trademarks and trademark registrations. All trademarks and registered trademarks in this book are the property of their respective holders....
8/29/2018 4:57:28 PM +00:00
Reverse Engineering in Computer Applications
The sole purpose of these lecture notes is to provide an aid to the high school students attending the HSSP course “C-01B Reverse Engineering in Computer Applications” taught during Spring 2001 at the Massachusetts Institute of Technology. The information presented hereby is on an “as-is” basis and the author cannot be possibly held liable for damages caused or initiated using methods or techniques described (or mentioned) in these notes.
8/29/2018 4:57:28 PM +00:00
Serial port programming for Windows and Linux
Serial port programming for Windows and Linux
8/29/2018 4:57:28 PM +00:00