Tài liệu miễn phí Tự động hoá
Download Tài liệu học tập miễn phí Tự động hoá
Image processing has moved into the mainstream, not only of the engineering world, but of society
in general. Personal computers are now capable of handling large graphics and images with ease,
and fast networks and modems transfer images in a fraction of the time required just a few years
ago.
8/29/2018 5:03:53 PM +00:00
Video processing has been a rapidly evolving field for telecommunications, computer, and media
industries.
8/29/2018 5:03:53 PM +00:00
Much of modern digital signal processing is concernedwith the extraction of information fromsignals
whichare noisy, orwhichbehave randomlywhile still revealingsomeattributeor parameterof a system
or environment under observation.
8/29/2018 5:03:53 PM +00:00
Systems designed to receive spatially propagating signals often encounter the presence of interference
signals. If the desiredsignal andinterferers occupy the same temporal frequency band, thentemporal
filtering cannot be usedto separate signal frominterference.
8/29/2018 5:03:53 PM +00:00
Estimating bearings of multiple narrowband signals from measurements collected by an array of
sensors has been a very active research problem for the last two decades. Typical applications of
this problem are radar, communication, and underwater acoustics.
8/29/2018 5:03:53 PM +00:00
Estimating the directions of arrival (DOAs) of propagating planewaves is a requirement ina variety of
applications including radar, mobile communications, sonar, and seismology. Due to its simplicity
and high-resolution capability,
8/29/2018 5:03:53 PM +00:00
Inverse Problems and Signal Reconstruction
8/29/2018 5:03:39 PM +00:00
Time Frequency and Multirate Signal Processing
8/29/2018 5:03:39 PM +00:00
Digital Audio Communications
8/29/2018 5:03:39 PM +00:00
Speech Processing
8/29/2018 5:03:39 PM +00:00
Image and Video Processing
8/29/2018 5:03:39 PM +00:00
Sensor Array Processing
8/29/2018 5:03:39 PM +00:00
Nonlinear and Fractal Signal Processing
8/29/2018 5:03:39 PM +00:00
DSP Software and Hardware
8/29/2018 5:03:39 PM +00:00
The following table contains a summary of quations developed in this section:
8/29/2018 5:03:39 PM +00:00
A termination is a one-port device with an impedance that matches the characteristic impedance of a given
transmission line.
8/29/2018 5:03:39 PM +00:00
Attenzione; questo controller V.5.0 prendera il posto del precedente controller v.3.0 su tutti i kit prodotti con ingresso uscita su porta parallela
8/29/2018 5:03:39 PM +00:00
Radar cross section is the measure of a target's ability to reflect radar signals in the direction of the radar receiver, i.e. it
is a measure of the ratio of backscatter power per steradian (unit solid angle) in the direction of the radar (from the target)
to the power density that is intercepted by the target.
8/29/2018 5:03:38 PM +00:00
Sensitivity in a receiver is normally taken as the minimum input signal (Smin) required to produce a specified output
signal having a specified signal-to-noise (S/N) ratio and is defined as the minimum signal-to-noise ratio times the mean
noise power,
8/29/2018 5:03:38 PM +00:00
Two tone and spurious response (single signal) receiver tests should be performed on EW and radar receivers to
evaluate their spurious free dynamic range.
8/29/2018 5:03:38 PM +00:00
Besides the considerations of noise and noise figure, the capabilities of receivers are highly dependant on the type
of receiver design. Most receiver designs are trade-offs of several conflicting requirements.
8/29/2018 5:03:38 PM +00:00
Raw video displays are simply oscilloscopes that display the detected and amplified target return signal (and the
receiver noise).
8/29/2018 5:03:38 PM +00:00
There are limits to the reach of radar
signals. At the frequencies normally used for
radar, radio waves usually travel in a straight
line.
8/29/2018 5:03:38 PM +00:00
Typical Radar modes are listed below in the general functional category for which they were designed. Not all of
these modes are applicable to all radars and certain radars have additional modes.
8/29/2018 5:03:38 PM +00:00
This file describes the contents of the program disk that accompanies the book Parallel Port Complete.
8/29/2018 5:03:38 PM +00:00
The CAD Converter CATIA for RobotStudio
imports native CATIA files (*.model), from CATIA
version 4.1.x, up to and including version 4.2.0.,
into ACIS SAT format (*.SAT).
8/29/2018 5:03:38 PM +00:00
This documentation is copyright 2000 by Parallax, Inc. BASIC Stamp is a registered trademark of Parallax, Inc. If you decide to use the name BASIC Stamp on your web page or in printed material, you must state: BASIC Stamp is a registered trademark of Parallax, Inc. Other brand and product names are trademarks or registered trademarks of their respective holders.
8/29/2018 5:03:38 PM +00:00
Signals and Systems
8/29/2018 5:03:38 PM +00:00
Signal Representation and Quantization
8/29/2018 5:03:38 PM +00:00
Fast Algorithms and Structures
8/29/2018 5:03:38 PM +00:00