Tài liệu miễn phí Tự động hoá

Download Tài liệu học tập miễn phí Tự động hoá

ONE-WAY RADAR EQUATION / RF PROPAGATION

The one-way (transmitter to receiver) radar equation is derived in this section. This equation is most commonly used in RWR or ESM type of applications. The following is a summary of the important equations explored in this section:

8/29/2018 5:03:56 PM +00:00

Online Radio & Electronics Course - 38 - Transmission_Lines

Online Radio & Electronics Course - 38 - Transmission_Lines

8/29/2018 5:03:56 PM +00:00

Pid Motor Control

Pid Motor Control

8/29/2018 5:03:56 PM +00:00

Polariza

Table 1 shows the theoretical ratio of power transmitted between antennas of different polarization. These ratios are seldom fully achieved due to effects such as reflection, refraction, and other wave interactions, so some practical ratios are also included.

8/29/2018 5:03:56 PM +00:00

PROPAGATION TIME / RESOLUTION

PROPAGATION TIME / RESOLUTION

8/29/2018 5:03:56 PM +00:00

POWER DENSITY

Radio Frequency (RF) propagation is defined as the travel of electromagnetic waves through or along a medium. For RF propagation between approximately 100 MHz and 10 GHz, radio waves travel very much as they do in free space and travel in a direct line of sight.

8/29/2018 5:03:56 PM +00:00

RADIATION PATTERNS

The radiation pattern is a graphical depiction of the relative field strength transmitted from or received by the antenna. Antenna radiation patterns are taken at one frequency, one polarization, and one plane cut.

8/29/2018 5:03:56 PM +00:00

Giới thiệu về PLC S7-200

PLC là từ viết tắt của Programable Logic Controller, đây là thiết bị điều khiển logic lập trình được, nó cho phép thực hiện linh hoạt các thuật toán điều khiển logic thông qua một ngôn ngữ lập trình.

8/29/2018 5:03:56 PM +00:00

Thiết kế môn học điều khiển Logic

- Tự động hóa và điều khiển: + Trên thực tế ở mọi ngành sản xuất công nghiệp, , mục tiêu tăng năng suất lao động được giải quyết bằng con đường gia tăng mức độ tự động hóa các quá trình và thiết bị sản xuất.

8/29/2018 5:03:56 PM +00:00

Bài giảng: Kỹ thuật điều khiển tự động

Điều khiển tự động là một ngành được sinh ra từ những ngành khoa học kỹ thuật khác, trong đó có sự kết hợp giữa cơ khí, điện, điện tử, điều khiển, khoa học máy tính,... Tiền thân trực tiếp sinh ra điều khiển tự động là do tự động hóa (automation) và cơ khí (mechanics) kết hợp với nhau, trong quá trình phân công lao động đã nảy sinh ra điều khiển tự động và một nhánh rẽ khác là cơ điện tử (mechatronics). Chính vì vậy mà ít nhiều thì ngành cơ điện tử và điều khiển tự động...

8/29/2018 5:03:55 PM +00:00

64 A Unified Instrumental Variable

A Unified Instrumental Variable Approach to Direction Finding in Colored Noise Fields

8/29/2018 5:03:54 PM +00:00

65 Electromagnetic Vector-Sensor Array Processing

This article (see also [1, 2]) considers new methods for multiple electromagnetic source localization using sensors whose output is a vector corresponding to the complete electric andmagneticfields at the sensor.

8/29/2018 5:03:54 PM +00:00

66 Subspace Tracking

Most high resolution direction-of-arrival (DOA) estimation methods rely on subspace or eigenbased information which can be obtained fromthe eigenvalue decomposition (EVD) of an estimated correlation matrix, or from the singular value decomposition (SVD) of the corresponding data matrix.

8/29/2018 5:03:54 PM +00:00

67 Detection: Determining the Number of Sources

The processing of signals received by sensor arrays generally can be separated into two problems: (1) detecting the number of sources and (2) isolating and analyzing the signal produced by each source.

8/29/2018 5:03:54 PM +00:00

68 Array Processing for Mobile Communications

This chapter reviews the applications of antenna array signal processing to mobile networks. Cellular networks are rapidly growing aroundtheworldanda number of emerging technologies are seentobe critical to their improved economics and performance.

8/29/2018 5:03:54 PM +00:00

69 Beamforming

Beamforming with Correlated Arrivals in Mobile Communications

8/29/2018 5:03:54 PM +00:00

70 Space-Time Adaptive Processing for Airborne Surveillance Radar

Space-Time Adaptive Processing (STAP) is a multi-dimensional filtering technique developed for minimizing the effects of various kinds of interference on target detection with a pulsed airborne surveillance radar.

8/29/2018 5:03:54 PM +00:00

71 Chaotic Signals and Signal Processing

Signals generated by chaotic systems represent a potentially rich class of signals both for detecting and characterizing physical phenomena and in synthesizing new classes of signals for communications, remote sensing, and a variety of other signal processing applications.

8/29/2018 5:03:54 PM +00:00

72 Nonlinear Maps

One-dimensional nonlinear systems, although simple in form, are applicable in a surprisingly wide variety of engineering contexts.

8/29/2018 5:03:54 PM +00:00

73 Fractal Signals

Fractal signal models are important in a wide range of signal processing applications. For example, they are often well-suited to analyzing and processing various forms of natural and man-made phenomena.

8/29/2018 5:03:54 PM +00:00

74 Morphological Signal and Image Processing

This chapter provides a brief introduction to the theory of morphological signal processing and its applications toimage analysis andnonlinear filtering.

8/29/2018 5:03:54 PM +00:00

75 Signal Processing

Signal Processing and Communication with Solitons

8/29/2018 5:03:54 PM +00:00

76 Higher-Order Spectral Analysis

The past 20 years witnessed an expansion of power spectrum estimation techniques, which have proved essential in many applications, such as communications, sonar, radar, speech/image processing, geophysics, and biomedical signal processing [13, 11, 7].

8/29/2018 5:03:54 PM +00:00

77 Introduction to the TMS320 Family of Digital Signal Processors

Since its introduction in 1982 with the TMS32010 processor, the TMS320 family of DSPs has been exceedingly popular.

8/29/2018 5:03:54 PM +00:00

78 Rapid Design and Prototyping of DSP Systems

We describe a RASSP-based design methodology for application specific signal processing systems which supports reengineering and upgrading of legacy systems using a virtual prototyping design process.

8/29/2018 5:03:54 PM +00:00

Khái niệm và đặc trưng cơ bản của cảm biến_chương 1

Cảm biến là thiết bị dùng để cảm nhận biến đổi các đại lượng vật lý và các đại lượng không có tính chất cân đo thành các đại lượng điện có thể đo và xử lý được

8/29/2018 5:03:53 PM +00:00

Cảm biến quang_chương 2

Như chúng ta đã biết, ánh sáng vừa có tính chất sóng vừa có tính chất hạt. Ánh sáng là một dạng của sóng điện từ, vùng ánh sáng nhìn thấy có bước sóng.

8/29/2018 5:03:53 PM +00:00

Cảm biến đo nhiệt độ_chương 3

Nhiệt độ là một trong số những đại lượng có ảnh hưởng rất lớn đến tính chất vật chất, bởi vậy trong nghiên cứu khoa học, trong công nghiệp cũng như trong đời sống hàng ngày.

8/29/2018 5:03:53 PM +00:00

Cảm biến đo vị trí và dịch chuyển_chương 4

Việc xác định vị trí và dịch chuyển đóng vai trò rất quan trọng trong kỹ thuật. Hiện nay có hai phương cơ bản để xác định vị trí và dịch chuyển.

8/29/2018 5:03:53 PM +00:00

Cảm biến đo biến dạng_chương 5

Dưới tác động của ứng lực cơ học, trong môi trường chịu ứng lực xuất hiện biến dạng. Sự biến dạng của các cấu trúc ảnh hưởng rất lớn tới khả năng làm việc cũng như độ an toàn khi làm việc của kết cấu chịu lực.

8/29/2018 5:03:53 PM +00:00