Tài liệu miễn phí Phần cứng
Download Tài liệu học tập miễn phí Phần cứng
Standard UTP Switchboard Cable
Tham khảo tài liệu 'standard utp switchboard cable', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả
8/29/2018 4:40:51 PM +00:00
TrueNet®
ADC’s TrueNet® plug-and-play microcable trunk assemblies are round 12 fiber optical trunk cables pre-terminated with a high-density MPO connector on both ends. They can be used in conjunction with any of the other plug-and-play connectivity products to rapidly deploy fiber into a data center or Local Area Network (LAN). The TrueNet Microcable assemblies can simply be plugged into any plug-and-play cassette in the optical distribution frame or fiber enclosure which eliminates the need for on-site fiber termination and preparation....
8/29/2018 4:40:51 PM +00:00
TrueNet® Plug-and-Play Cassettes
ADC’s TrueNet® Fiber Panels (TFP) combine the unique features of vertical cable guides and our patented angle-left/angle right adapters, which offers bend radius protection, intuitive routing and easy connector access. Our TFP series can be ordered in one, two, or five rack-unit sizes to fit your unique needs. Designed for rack or cabinet mounting in the horizontal or equipment distribution area, the TFP’s modularity, functionality and density make them ideal for mounting in close proximity to servers, switches, routers and SANs....
8/29/2018 4:40:51 PM +00:00
Digital Monitor Module System
Designed as a flexible solution for network signal management, ADC’s Digital Monitor Module (DMM) system provides a centralized coaxial termination and interconnection point between network elements (NE). The DMM system allows a permanent, dedicated connection between two NEs while providing dual, nonintrusive test access points for bidirectional monitoring of the network signal. Ensuring unsurpassed quality, this interconnect solution features cable management designed to increase reliability, maintain signal flow, and allow easy cable identification. To enhance network flexibility, the DMM system allows modules to be installed in a chassis as network requirements increase....
8/29/2018 4:40:51 PM +00:00
Data Center Optical Distribution Frame with Plug-and-Play Cassettes
ADC’s Data Center Optical Distribution Frame (ODF) with plug-and-play (MPO) cassettes is the highest density optical distribution frame solution available today. It efficiently manages up to 1,728 fiber terminations using the 144-position block (or 2,304 using the 192-position block) in a single frame in either a cross-connect or inter-connect design.
8/29/2018 4:40:51 PM +00:00
Adding New Video Services Warrants New Central Office Considerations
Although it’s fair to say the distribution and access elements within the outside plant (OSP) portion of the fiber-to-the-premise (FTTP) network demand the majority of attention during deployment, it’s still important not to overlook implications to the central office (CO). Any FTTP network requires the same flexibility as the transport network—and it all begins in the CO.
8/29/2018 4:40:51 PM +00:00
LoopStar® 700 Solutions
While your current Campus system and existing copper cable facilities provide network flexibility and can support a wide range of applications, the deployment of ADC’s LoopStar 700 can enable new IP real-time applications such as Voice over IP (VoIP) and IP Video over your existing infrastructure. The LoopStar 714 and LoopStar 718 can provide these new IP applications for minimal cost and operational disruption via their sophisticated Layer 2 Ethernet capabilities. The LoopStar 714 provides Ethernet over 4x T1 and the LoopStar 718 provides Ethernet over 8x T1 derived from the Campus-RS system....
8/29/2018 4:40:51 PM +00:00
Fiber Managment System Delivers Quick ROI for Central Office
Shortened maximum fiber jumper length from 275 to 30 feet by adding an intermediate distribution frame between each aisle of multiplexers and the fiber main distribution frame using ADC LGX fiber frames.
8/29/2018 4:40:51 PM +00:00
Sistema de gerenciamento de fibras FiberGuide
O Sistema de Gerenciamento de Cabos de Fibra FiberGuide® da ADC é um sistema de canaletas projetado para proteger e rotear os cordões ópticos simples e múltiplos e cabos multifibra internos (Intrafacility Cables) para dentro e para fora dos módulos de emendas, bastidores de distribuição de fibras e dispositivos terminais de fibra ótica. O sistema FiberGuide é projetado para garantir que seja mantido um raio da curvatura mínimo de 2 independentemente de quais componentes e seções estejam montados juntos...
8/29/2018 4:40:49 PM +00:00
FiberGuide® Glasfasermanagementsystem Systembeschreibung
Das FiberGuide® Glasfasermanagementsystem von ADC ist ein Kabelführungssystem, das entwickelt wurde, um Glasfaserverbindungskabel, mehradrige Kabel sowie IFC-Kabel zu schützen und zu oder von Glasfaserspleißstellen, Glasfaserkabelverteilern und Glasfasergeräten zu führen. Das FiberGuide-System wurde so entworfen, daß ein 2 Mindestbiegeradius erzielt wird, unabhängig davon, welche Komponenten und Abschnitte miteinander verbunden werden.
8/29/2018 4:40:49 PM +00:00
Sistema de módulos de valor agregado Índice
O Sistema de Módulos de Valor Agregado da ADC (Sistema VAM) proporciona flexibilidade e funcionalidade ao sistema de transporte óptico permitindo que os provedores de serviços de telecomunicações incorporem, facilmente, componentes ópticos à rede. Essa plataforma versátil proporciona a base para os quadros de distribuição de fibras do futuro. O Sistema VAM é formado por vários chassis e componentes ópticos que se adequam a todos os quadros de distribuição de fibras da ADC já existentes, assim como a diversos outros ambientes de montagem. Os componentes ópticos podem incluir:...
8/29/2018 4:40:49 PM +00:00
OMX™ 600
Tham khảo tài liệu 'omx™ 600', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả
8/29/2018 4:40:49 PM +00:00
Baie de distribution à fibres optiques OMX™ 600
La croissance sans précédent de l’industrie des télécommunications a conduit au développement considérable de la fibre optique. La capacité de gestion d’une système de distribution à fibres optiques devient alors un enjeu crucial pour un fournisseur de services au fur et à mesure que le nombre de fibres optiques de son réseau augmente. Par ailleurs, l’espace disponible au sol est également un facteur déterminant. La possibilité de gagner de l’espace disponible au sol en augmentant la densité des solutions de distribution à fibres optiques peut générer des économies considérables. En outre, les fournisseurs de services ont besoin d’une solution de distribution très souple, qui leur permette...
8/29/2018 4:40:49 PM +00:00
Doubler for Extending Reach of Two-Pair Fixed Rate HDSL
The EDU-840, L2 is utilized to extend the reach of a two-pair fixed rate WorldDSL HDSL circuit. Up to two EDU-840’s can be installed in a circuit, each of which will extend the reach of the circuit. For example, if, based on the noise model and wire gauge, reach is 3 Km, adding one EDU-840 will extend reach to 5.8 Km and a second will extend reach to 7.5 Km. The EDU-840 is suitable for outdoor use and is mounted in one of several ADC weatherproof enclosures. It features a front panel LED for easy verification of operation during installation and troubleshooting as well as lightning...
8/29/2018 4:40:49 PM +00:00
WorldDSL™ Accessories for Customer Premises/Central Offices
ECA-80x Connector Adapters ADC offers a line of connector adapters to provide needed data port connectors as well as offering conversion of the method of attaching HDSL/G.SHDSL or E1 lines to an 832 chassis, any of the ERE- 811 enclosures or any ETU.
8/29/2018 4:40:49 PM +00:00
DSX600™ The DSX Value Solution
Tham khảo tài liệu 'dsx600™ the dsx value solution', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả
8/29/2018 4:40:49 PM +00:00
DSX600™
Tham khảo tài liệu 'dsx600™', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả
8/29/2018 4:40:49 PM +00:00
The Avidia Advantage Series Subtending: Reduce Equipment Cost and Complexity
In today’s competitive telecommunications environment, you are faced with the challenge of minimizing the cost and complexity of equipment at the network edge. To meet this need, the ADC Avidia Integrated Access Switch (IAS) combines the functionality of an ATM edge switch with a DSLAM. Then, through subtending, in which several systems are viewed and managed by a single management platform, deployment of Avidia allows you to lower equipment and network management costs. Avidia concentrates multiple traffic streams to a single network uplink, enabling the elimination of expensive ATM edge switches. By reducing the number of network elements, you can reduce the number of element management systems,...
8/29/2018 4:40:49 PM +00:00
Megabit Modems 410F/420F ADSL Modem Pair for Advanced LAN Applications
Megabit Modems® 410F and 420F are point-to-point bridging and routing solutions targeted for advanced LAN extension applications. The Megabit Modem 410F (local device) and Megabit Modem 420F (remote device) enable transmission of cells-over-ADSL at speeds up to 7.552 Mbps downstream and 928 kbps upstream. ADC’s Megabit modem products offer groups or individual users secure, high-speed connectivity to today’s growing array of remote resources. Whether accessing the Internet, connecting remote network sites, or telecommuting, ADC has the right modem for your application and budget....
8/29/2018 4:40:49 PM +00:00
Fiber Panel Products Table of Contents
Limited floor space and smaller fiber counts often dictate that multiple pieces of communications apparatus share common equipment racks. The FL1000 is designed to be mounted within standard 19 or 23 EIA equipment racks. Standard flush mount capability also makes this panel well-suited to cabinet installations. The left/right orientation of the individual angled adapters and retainers allows the easy exit of the jumpers from the panel. A removable rear door on the 24 termination panels allows efficient access the interior of the panel for the routing and termination of fiber cables. The 12 position panel is 1.75 high and features a sliding bulkhead drawer to accommodate easy access within the panel....
8/29/2018 4:40:49 PM +00:00
RZX-3
Tham khảo tài liệu 'rzx-3', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả
8/29/2018 4:40:49 PM +00:00
FL2000
Tham khảo tài liệu 'fl2000', công nghệ thông tin, phần cứng phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả
8/29/2018 4:40:49 PM +00:00
Productos Next Generation Frame Contenido
El crecimiento sin precedentes en la industria de las telecomunicaciones ha llevado al uso extensivo de la fibra óptica en los últimos años. Como resultado de ello, muchos proveedores de servicios descubren que sus bastidores se están sobrepoblando con grandes cantidades de cables con conexiones provisionales de fibra óptica. Además, el rápido desarrollo de SONET e iniciativas de fibra en redundancia y vídeo, ha creado una demanda cada vez mayor de una densidad de terminación en el bastidor repartidor de fibras. Los proveedores de servicio deben construir una infraestructura de red estable que brinde una base sólida para proporcionar los nuevos servicios mejorados de banda ancha...
8/29/2018 4:40:49 PM +00:00
Fiber Mux Cabinets with Soneplex Loop Extender Chassis
ADC’s fiber mux cabinet allows carriers to provide DS1 services to customers previously unreachable due to distance limitations from the central office (CO). By extending fiber into the loop, the Soneplex-equipped cabinets can deliver up to 84 lines of DS1 service using multiple transport technologies like HDSL, HDSL2, HDSL4 and T1, offering carriers a cost-effective solution for delivery of T1 based services.
8/29/2018 4:40:49 PM +00:00
DS3 Multiplexer (M13)
The HiGain HXU-358 DS3 multiplexer leverages the benefits of imbedded asynchronous networks by enabling cost-effective direct insertion of DS1s or E1s onto any network via an economical DS3 interface. ADC’s M13 asynchronous multiplexer and T1 testing technology is the highest service density multiplexer available. Space, power and heat dissipation requirements are all minimised. Additional capital costs for T1 testing equipment can be eliminated. All HiGain multiplexers can be used in either the Soneplex Wideband System 3190 (WBS-3190) chassis or the ACE chassis. Upgrading is as simple as replacing the HiGain multiplexer – no costly and time consuming physical changes are required....
8/29/2018 4:40:49 PM +00:00
GUADALUPE VALLEY DEPLOYS FIBER TO THE PREMISE
Guadalupe Valley Telecommunications Cooperative, Inc. (GVTC) was formed in 1951 and today is the largest telephone cooperative in the state of Texas. Spanning 2,000 square miles in eleven counties to the north and east of San Antonio, GVTC serves over 30,000 customers with more than 43,000 access lines.
8/29/2018 4:40:49 PM +00:00
FMT Series Fiber Optic Panel
Cable management is an essential consideration in any successful fiber communications network. ADC’s FMT series fiber optic panel enables termination, termination/splicing, termination/ storage, splicing only and slack storage for optical fibers in a compact 1 or 2 RU panel.
8/29/2018 4:40:49 PM +00:00
Successful Infrastructure Deployment at Florida State University
Deploy proper planning to deliver campus infrastructures that can support a technologically rich learning environment, extensive campus construction projects, and customer service while matching technology needs to budgets at Florida State University.
8/29/2018 4:40:49 PM +00:00
FTTH COMMUNICATIONS DEFERS CAPEX CLOSER TO REVENUE IN THE PON
FTTH Communications is an integrated provider of voice, video and Internet services in Minneapolis. Delivering services to residential and business customers on an all-fiber network, the FTTH Communications business plan depends upon a combination of low costs, exceptional service, and leading-edge technology to increase both the number of subscribers and overall subscriber satisfaction.
8/29/2018 4:40:49 PM +00:00
Distribution Architecture: Hardened Connectors vs. Field Splicing
Making cost-sensitive decisions about deploying FTTX architectures requires service providers to not only look at initial installation costs, but to also peer into the future regarding operational and maintenance expenses following service turn-up. Cost modeling allows the deployer to review the financial benefits of their design choices before deployment begins. This paper specifically addresses the cost comparisons between using hardened connectors vs. splices in two basic areas of the FTTX network – the distribution plant and drop cable portions....
8/29/2018 4:40:49 PM +00:00