Tài liệu miễn phí Cơ khí - Chế tạo máy
Download Tài liệu học tập miễn phí Cơ khí - Chế tạo máy
Giáo trình Thiết kế ô tô (Dùng cho hệ đại học): Phần 2
Nội dung kiến thức ở giáo trình Thiết kế ô tô này nhằm trang bị cho sinh viên những hiểu biết cơ bản về đặc điểm cấu tạo và nguyên lý làm việc của các cụm, chi tiết và các hệ thống thuộc gầm ô tô, những tính toán cơ bản về động học và động lực học của các cụm và các hệ thống, từ đó làm cơ sở cho những hoạt động nghề nghiệp thuộc lĩnh vực sửa chữa, lắp ráp, kiểm định và thiết kế cải tiến những mẫu xe mới.
4/10/2023 7:15:51 AM +00:00
Giáo trình Thiết kế ô tô (Dùng cho hệ đại học): Phần 1
Cuốn giáo trình Thiết kế ô tô có cấu trúc gồm 10 chương đề cập đến những vấn đề cơ bản quan trọng của môn học, phù hợp với chương trình quy định của Bộ Giáo dục và Đào tạo đối với ngành Công nghệ ô tô. Sách được chia thành 2 phần, mời các bạn cùng tham khảo nội dung phần 1 cuốn sách.
4/10/2023 7:15:42 AM +00:00
Giáo trình Thí nghiệm Vật liệu học: Phần 2
Phần 2 cuốn giáo trình Thí nghiệm Vật liệu học cung cấp cho người đọc các kiến thức: Microstructure analysis of graphite - cast iron, hardness testing and quenching steel process, tempering quenched – steel. Mời các bạn cùng tham khảo nội dung chi tiết.
4/10/2023 7:15:35 AM +00:00
Giáo trình Thí nghiệm Vật liệu học: Phần 1
Phần 1 cuốn giáo trình Thí nghiệm Vật liệu học cung cấp cho người đọc các kiến thức: Chuẩn bị mẫu để nghiên cứu tổ chức tế vi của kim loại, đo độ cứng và nghiên cứu quá trình tôi thép, nghiên cứu tổ chức tế vi của hợp kim Fe – C, nghiên cứu tổ chức gang graphite. Mời các bạn cùng tham khảo nội dung chi tiết.
4/10/2023 7:15:25 AM +00:00
Ebook The Mechanical Design Process (Fourth Edition): Part 2
(BQ) Ebook The Mechanical Design Process (Fourth Edition): Part 2 presents the following content: Chapter 8 concept evaluation and selection; chapter 9 product generation; chapter 10 product evaluation for performance and the effects of variation; chapter 11 product evaluation: design for cost, manufacture, assembly, and other measures; chapter 12 wrapping up the design process and supporting the product; Appendix A: properties of 25 materials most commonly used in mechanical design; appendix B: normal probability; appendix C: the factor of safety as a design variable; appendix D: human factors in design.
4/10/2023 7:11:17 AM +00:00
Ebook The Mechanical Design Process (Fourth Edition): Part 1
(BQ) Ebook The Mechanical Design Process (Fourth Edition): Part 1 presents the following content: Chapter 1 why study the design process? chapter 2 understanding mechanical design; chapter 3 designers and design teams; chapter 4 the design process and product discovery; chapter 5 planning for design; chapter 6 understanding the problem and the development of engineering specifications; chapter 7 concept generation.
4/10/2023 7:11:08 AM +00:00
Ebook Standard Aircraft Handbook for Mechanics and Technicians (Seventh Edition): Part 2
Ebook Standard Aircraft Handbook for Mechanics and Technicians (Seventh Edition): Part 2 presents the following content: Chapter 7 Aircraft Plumbing; Chapter 8 Control Cables; Chapter 9 Electrical Wiring and Installation; Chapter 10 Aircraft Drawings; Chapter 11 Nondestructive Testing (NDT) or Nondestructive Inspection (NDI); Chapter 12 Corrosion Detection and Control; Chapter 13 Composites; Chapter 14 Standard Parts.
4/10/2023 7:08:28 AM +00:00
Ebook Standard Aircraft Handbook for Mechanics and Technicians (Seventh Edition): Part 1
Ebook Standard Aircraft Handbook for Mechanics and Technicians (Seventh Edition): Part 1 presents the following content: Chapter 1 Introduction; Chapter 2 Tools and How to Use Them; Chapter 3 Materials and Fabricating; Chapter 4 Drilling and Countersinking; Chapter 5 Riveting; Chapter 6 Bolts and Threaded Fasteners.
4/10/2023 7:08:19 AM +00:00
Ebook Thermodynamics in material (Second Edition): Part 2
(BQ) The main contents of Ebook Thermodynamics in material (Second Edition): Part 2 include all of the following: Chapter 9 Multicomponent Heterogeneous Systems; Chapter 10 Thermodynamics of Phase Diagrams; Chapter 11 Multicomponent Multiphase Reacting Systems; Chapter 12 Capillarity Effects in Thermodynamics; Chapter 13 Defects in Crystals; Chapter 14 Equilibrium in Continuous Systems: Thermodynamic Effects of External Fields; Chapter 15 Electrochemistry.
4/10/2023 7:06:33 AM +00:00
Ebook Thermodynamics in material (Second Edition): Part 1
(BQ) The main contents of Ebook Thermodynamics in material (Second Edition): Part 1 include all of the following: Chapter 1 Why Study Thermodynamics? Chapter 2 The Structure of Thermodynamics; Chapter 3 The Laws of Thermodynamics; Chapter 4 Thermodynamic Variables and Relations; Chapter 5 Equilibrium in Thermodynamic Systems; Chapter 6 Statistical Thermodynamics; Chapter 7 Unary Heterogeneous Systems; Chapter 8 Multicomponent Homogeneous Nonreacting Systems: Solutions
4/10/2023 7:06:23 AM +00:00
Ebook Product design for the environment: A life cycle approach – Part 2
(BQ) Ebook Product design for the environment: A life cycle approach – Part 2 presents the following content: Life cycle environmental strategies and considerations for product design, engineering methods for product duration design and evaluation, product constructional system definition based on optimal life cycle strategies, environmental characterization of materials and optimal choice, design for disassembly and distribution of disassembly depth, optimal disassembly planning, product recovery cycles planning and cost–benefit analysis of recovery, methodological framework and analysis models for simulation of the product life cycle.
4/10/2023 7:05:21 AM +00:00
Ebook Product design for the environment: A life cycle approach – Part 1
(BQ) Ebook Product design for the environment: A life cycle approach – Part 1 presents the following content: From sustainable development to design for environment; life cycle approach and the product – system concept and modeling; life cycle design and management; life cycle assessment; life cycle cost analysis; integrated economic–environmental analysis; product design and development process; integration of environmental aspects in product design.
4/10/2023 7:05:11 AM +00:00
Ebook Probability and statistics for engineers and scientists (Ninth edition): Part 2
(BQ) Ebook Probability and statistics for engineers and scientists (Ninth edition): Part 2 presents the following content: Simple linear regression and correlation, multiple linear regression and certain nonlinear regression models, one-factor experiments: general, factorial experiments (two or more factors), 2k factorial experiments and fractions, nonparametric statistics, statistical quality control, bayesian statistics, Appendix A: statistical tables and proofs, Appendix B: answers to odd-numbered non-review exercises.
4/10/2023 7:04:55 AM +00:00
Ebook Probability and statistics for engineers and scientists (Ninth edition): Part 1
(BQ) Ebook Probability and statistics for engineers and scientists (Ninth edition): Part 1 presents the following content: Introduction to statistics and data analysis, probability, random variables and probability distributions, mathematical expectation, some discrete probability distributions, some continuous probability distributions, functions of random variables (optional), fundamental sampling distributions and data descriptions, one- and two-sample estimation problems, one- and two-sample tests of hypotheses.
4/10/2023 7:04:44 AM +00:00
Ebook Plastic design and second-order analysis of steel frames: Part 2
(BQ) Ebook Plastic design and second-order analysis of steel frames: Part 1 presents the following content: Chapter 5 work method, chapter 6 estimate of deflections, chapter 7 first-order hinge-by-hinge analysis, chapter 8 second-order plastic hinge analysis.
4/10/2023 7:03:40 AM +00:00
Ebook Plastic design and second-order analysis of steel frames: Part 1
(BQ) Ebook Plastic design and second-order analysis of steel frames: Part 1 presents the following content: Chapter 1 basic concepts, chapter 2 the plastic hinge, chapter 3 the tools used in plastic analysis and design, chapter 4 equilibrium method.
4/10/2023 7:03:24 AM +00:00
Ebook Orbital mechanics for engineering students: Part 2
(BQ) Ebook Orbital mechanics for engineering students: Part 2 presents the following content: Chapter 7 relative motion and rendezvous, chapter 8 interplanetary trajectories, chapter 9 rigid-body dynamics, chapter 10 satellite attitude dynamics, chapter 11 rocket vehicle dynamics.
4/10/2023 7:03:01 AM +00:00
Ebook Orbital mechanics for engineering students: Part 1
(BQ) Ebook Orbital mechanics for engineering students: Part 1 presents the following content: Chapter 1 dynamics of point masses, chapter 2 the two-body problem, chapter 3 orbital position as a function of time, chapter 4 orbits in three dimensions, chapter 5 preliminary orbit determination, chapter 6 orbital maneuvers.
4/10/2023 7:02:47 AM +00:00
Ebook Marks’ standard handbook for mechanical engineers (Tenth Edition): Part 2
(BQ) Ebook Marks’ standard handbook for mechanical engineers (Tenth Edition): Part 2 presents the following content: Power generation; materials handling; transportation; building construction and equipment; manufacturing processes; fans, pumps, and compressors; electrical and electronics engineering; instruments and controls; industrial engineering; the engineering environment; refrigeration, cryogenics, optics, and miscellaneous.
4/10/2023 7:00:13 AM +00:00
Ebook Marks’ standard handbook for mechanical engineers (Tenth Edition): Part 1
(BQ) Ebook Marks’ standard handbook for mechanical engineers (Tenth Edition): Part 1 presents the following content: Mathematical tables and measuring units, mathematics, mechanics of solids and fluids, heat, strength of materials, materials of engineering, fuels and furnaces, machine elements.
4/10/2023 6:59:57 AM +00:00
Ebook Industrial robotics: Technology, programming, and applications – Part 2
(BQ) Ebook Industrial robotics: Technology, programming, and applications – Part 2 presents the following content: Robot programming; robot languages; artificial intelligence; robot cell design and control; economic analysis for robotics; material transfer and machine loading/unloading; processing operations; assembly and inspection; an approach for implementing robotics; safety, training, maintenance, and quality; social and labor issues; robotics technology of the future; future applications.
4/10/2023 6:57:44 AM +00:00
Ebook Industrial robotics: Technology, programming, and applications – Part 1
(BQ) Ebook Industrial robotics: Technology, programming, and applications – Part 1 presents the following content: Chapter 1 introduction; chapter 2 fundamentals of robot technology, programming, and applications; chapter 3 control systems and components; chapter 4 robot motion analysis and control; chapter 5 robot end effectors; chapter 6 sensors in robotics; chapter 7 machine vision.
4/10/2023 6:57:24 AM +00:00
Ebook Marks' standard handbook for mechanical engineers (11th edition): Part 2
(BQ) Ebook Marks' standard handbook for mechanical engineers: Part 2 presents the following content: Section 11 transportation; section 12 building construction and equipment; section 13 manufacturing processes; section 14 fans, pumps, and compressors; section 15 electrical and electronics engineering; section 16 instruments and controls; section 17 industrial engineering; section 18 the regulatory environment; section 19 refrigeration, cryogenics, and optics; section 20 emerging technologies.
4/10/2023 6:55:17 AM +00:00
Ebook Marks' standard handbook for mechanical engineers (11th edition): Part 1
(BQ) Ebook Marks' standard handbook for mechanical engineers: Part 1 presents the following content: Section 1 mathematical tables and measuring units, section 2 mathematics, section 3 mechanics of solids and fluids, section 4 heat, section 5 strength of materials, section 6 materials of engineering, section 7 fuels and furnaces, section 8 machine elements, section 9 power generation, section 10 materials handling.
4/10/2023 6:54:57 AM +00:00
Ebook Fluid mechanics: Fundamentals and applications – Part 2
(BQ) In ebook Fluid mechanics: Fundamentals and applications – Part 2, a comprehensive set of appendices is provided, giving the thermodynamic and fluid properties of several materials, not just air and water as in most introductory fluids texts. Many of the end-of-chapter problems require use of the properties found in these appendices.
4/10/2023 6:51:47 AM +00:00
Ebook Fluid mechanics: Fundamentals and applications – Part 1
(BQ) In ebook Fluid mechanics: Fundamentals and applications – Part 1 is organized into 15 chapters beginning with fundamental concepts of fluids and fluid flows and ending with an introduction to computational fluid dynamics, the application of which is rapidly becoming more commonplace, even at the undergraduate level.
4/10/2023 6:51:33 AM +00:00
Ebook Fluid dynamics for the study of transonic flow: Part 2
(BQ) In ebook Fluid dynamics for the study of transonic flow: Part 2, the following contents will be discussed: Chapter 5 analytical solutions of the transonic continuity equation, chapter 6 viscous transonic flow, chapter 7 numerical methods of transonic flow computation, chapter 8 steps toward the optimum transonic aircraft, chapter 9 transonic wind tunnel testing.
4/10/2023 6:51:21 AM +00:00
Ebook Fluid dynamics for the study of transonic flow: Part 1
(BQ) In ebook Fluid dynamics for the study of transonic flow: Part 1, the following contents will be discussed: Chapter 1 brief review of the basic laws of aerodynamics, chapter 2 the theory of inviscid transonic flow, chapter 3 nonsteady transonic flow, chapter 4 lift slope and drag rise at sonic speed.
4/10/2023 6:51:13 AM +00:00
Ebook Fluid mechanics for engineers (A Graduate Textbook): Part 2
(BQ) In ebook Fluid mechanics for engineers (A Graduate Textbook): Part 2, the following contents will be discussed: Chapter 8 laminar-turbulent transition; chapter 9 turbulent flow, modeling; chapter 10 free turbulent flow; chapter 11 boundary layer theory; chapter 12 compressible flow; chapter a tensor operations in orthogonal curvilinear coordinate systems; chapter b physical properties of dry air.
4/10/2023 6:50:59 AM +00:00
Ebook Fluid mechanics for engineers (A Graduate Textbook): Part 1
(BQ) In ebook Fluid mechanics for engineers (A Graduate Textbook): Part 1, the following contents will be discussed: Chapter 1 introduction; chapter 2 vector and tensor analysis, applications to fluid mechanics; chapter 3 differential balances in fluid mechanics; chapter 4 kinematics of fluid motion; chapter 5 integral balances in fluid mechanics; chapter 6 inviscid potential flows; chapter 7 viscous laminar flow.
4/10/2023 6:50:49 AM +00:00