Xem mẫu
Pro PatchTM
Optical Normal Through Panel
Module Front Module Rear Chassis Open
ADC’s Optical Normal Through Panel is the latest addition to its Pro Patch line of broadcast patching products. This fiber panel is designed to provide patch by exception, normal through functionality, similar to copper-based patch panels. Traditional fiber patch panels require a fiber jumper to be in place at all times. With this newly designed panel, however, all fiber “Source” and “Destination” connections are on the rear of the panel, with a normal through connection between the “Source” and “Destination” ports. For greater convenience and reliability, patch and monitoring capabilities are accessed on the front of the panel.
Features
Two density options:
• The 3RU chassis houses 6 modules to provide 24 fiber terminations (12 pairs) using simplex connectors (SC, FC, ST).
• The 4RU chassis houses 6 modules to provide 48 fiber terminations (24 pairs) using small-form-factor connectors (LC).
Functionality:
• Each module contains pairs of “Source” and “Destination” fibers plus optional monitor ports and a switch for emergency patching.
• Accommodates 1310 and 1550 singlemode wavelengths (switch wavelength range is 1290-1330 and 1525-1610).
• Connector ports on front and rear may be SC, FC, ST or LC.
• IL through module is approximately 0.5 dB (final specifications TBD).
• Module port is configurable to 90/10, 95/5 or 99/1 split ratios.
Module specifications:
• Modules may be added to the chassis as needed.
• “Source” and “Destination” terminations may be made by either splicing raw cable to pigtails attached to the modules or by routing connectorized patch cords to the back of the modules.
• Manual switch on front of module to change to “Patched” operation.
• LED indicators for “Normal” and “Patched” operations.
• Modules are available with or without monitor ports on the front.
Chassis specification:
• 19" EIA flush mounting
• Hot swappable power supply
to power switches inside modules
• 110/220 IEC interface
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Pro PatchTM Optical Normal Through Panel Module Schematics
The new Pro Patch Optical Normal Through Panel provides patch by exception, normal through functionality. Fiber “Source” and “Destination” connections are located on the rear of the panel, with a normal through connection between the “Source” and “Destination” ports. To enable patching functionality, a fiber patch cord is plugged into the front of the panel and a switch is flipped.
Back of Module Front of Module
A Source
A Destination
B Source
B Destination
Switch 10%
90% 90/10 tap
Switch
10%
90% 90/10 tap
Monitor
Source
Destination
Monitor
Source
Destination
Normal
Back of Module Front of Module
A Source
A Destination
Switch
90% 90/10 tap
Monitor
Source
Destination
B Source Switch Monitor
B Destination 90% 90/10 tap 10% Source
Destination
Patched
These are preliminary specifications.
Call an ADC distributor for more details. To find a distributior near you visit adc.com/partners.
Ordering Information
Description Catalog Number
Empty chassis with power supply
3 RU chassis with power supply and IEC cord, patch cord storage in rear 3 RU chassis with power supply and IEC cord, splice tray area in rear
4 RU chassis with power supply and IEC cord, patch cord storage in rear 4 RU chassis with power supply and IEC cord, splice tray area in rear
Power supply
Replacement power supply with IEC cord
PPO-3RU-P PPO-3RU-S PPO-4RU-P PPO-4RU-S
PPO-PWR
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 2
Pro PatchTM Optical Normal Through Panel Pro Patch™ Preconfigured Panels
The information below explains the ordering numbers contained in the charts on this page.
Catalog Number
PPO - __ __ __ __ __ __ __ __ - __
Panel Size Power Supply
3 3 RU 0 No cord
4 4 RU 1 With IEC cord
Modules Loaded Rear Cable Management/splice
1-6 Number of modules loaded 0
2
Patch cord slack storage
Heat shrink splice trays
Front Patch Connector Style 3 Mass Fusion splice trays
2 SMFC
7 SMSC Rear Connector/Splice
J SMSC (8º angled polish)
8 SMLC (4 RU only)
4 SMST
2 SMFC
7 SMSC
J SMSC (8º angled polish)
8 SMLC (4 RU only)
Switch Type 0 Pigtail for splicing
0 Standard individual 4 SMST
2 Pair switch together
Monitor Split Style
Monitor Port Connector 0 No monitor 0 No monitor A 90/10
F SMFC (8º angled polish) B 95/5 J SMSC (8º angled polish) C 99/1 Q SMALC (4 RU only)
Custom configurations are available. Please contact ADC Technical Assistance Center.
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 3
Pro Patch™ Modules
The information below explains the ordering numbers contained in the charts on this page.
Catalog Number PPO-M __ __ __ __ __ __
Panel Size Rear Connector/Splice
3 3 RU 7 SMSC
4 4 RU J SMSC (8º angled polish)
8 SMLC (4 RU only) Front Patch Connector Style 0 Pigtail for splicing
2 SMFC 4 SMST 7 SMSC 2 SMFC
J SMSC (8º angled polish)
4 SMST Monitor Split Style
8 SMLC (4 RU only) 0
A
No monitor
90/10
Switch Type B 95/5
0 Standard individual C 99/1
2 Pair switch together
Monitor Port Connector
0 No monitor
F SMFC (8º angled polish)
J SMSC (8º angled polish)
Q SMALC (4 RU only)
Custom configurations are available. Please contact ADC Technical Assistance Center.
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
103447AE 9/06 Revison © 2006 ADC Telecommunications, Inc. All Rights Reserved
...
- tailieumienphi.vn
nguon tai.lieu . vn