Xem mẫu
LoopStar® 700
Next Generation Ethernet Access and Transport Solutions
The LoopStar 700 Product Family
The LoopStar 700 product family delivers all the features needed at the converged access edge and offers a complete and cost-effective packet-based solution for service providers who are looking to:
· Add new revenue-producing services · Extend and enhance their current
infrastructures
· Protect their current revenue streams · Provide the migration path to next-
generation IP/MPLS networks
This product family uniquely combines packet-switched and circuit-switched services into a single architecture—at cost points that make it extremely attractive for offering new services to both large and small customers. With payback times measured in
months, service providers can quickly and
efficiently consolidate all services onto a single, converged infrastructure, without having to cannibalize existing revenues or create overlays on their current networks. The LoopStar 700 product family meets service providers’ needs to reliably scale and manage edge services for the world’s largest and most complex networks. Offering an architecture specifically designed with a clear delineation between the control plane and the data plane, this product family can support multiple services and transport types on a single platform—maximizing revenue and minimizing operational and capital costs. This approach to hardware is married to a service-rich software image, ensuring service continuity and minimized operational expense as providers deploy the various
LoopStar 700 platforms.
Why LoopStar 700?
Features
· Converged packet access at the network edge
· Complete suite of Ethernet services and TDM services
· Proven resiliency without the usual high costs
· Packet- and circuit-based transport
· Intelligent service management at the multi-service demarcation point
· Protected Switching Ring (PSR) –
a low-cost, sub-50 millisecond failover scheme for Optical Ethernet
· Multiprotocol Label Switching (MPLS) and Virtual Private LAN Services (VPLS)
Converged packet-based access platforms designed to operate at the edge of the metro and wide area network
With customers demanding higher speed Ethernet services at lower price points, service providers are faced with the task of evolving their circuit-switched backbones to IP/MPLS-based backbones. During this
evolution, carriers will have to maintain and
continue to offer services that have been traditionally offered over SONET/SDH, Frame Relay and ATM circuits.
This creates a dilemma: How can providers enable these new Ethernet services and applications while maintaining the viability of current services and infrastructures? With features like Q-in-Q tag stacking, 4,095 VLANS, rate limiting, link aggregation, multiple levels of Quality of Service (QoS), 802.1d bridging, a unique “EtherDACS” port/VLAN switching mode and Ethernet transport ranging from 10/100 to Gigabit Ethernet, the LoopStar 700 allows service providers to offer robust Ethernet services to their customers.
The LoopStar 700 offers one of the most comprehensive suites of pseudo-wire Time Division Multiplexing (TDM) services over packet-switched infrastructures. Using standards-based circuit emulation with patented technology, LoopStar 700 products can transport T1/E1/J1 services
with ILEC-quality.
LoopStar 750
Four interface slots for large customers or aggregation
This 4-slot product is optimized for larger Interface cards include:
customers, multi-tenant buildings and service aggregation sites such as at the central office or wiring center. The LoopStar 750 can also function as an aggregation point for any of the other members of the LoopStar 700 family.
NEBS 3 certified with redundant AC or DC power options, this product can be
configured for any number of scenarios.
· 1 port Gigabit Ethernet (SFP)
· 8 port 100Base-FX (SM or MM) · 8 port 10/100Base-T
· Combo 4 port 10/100Base-T and 2 port 100Base-FX (SFP)
· 1 port OC-12c/STM-4c · 1 port OC-3c/STM-1
· 3 port DS3 with NxDS3 option · 8 port T1/E1/J1
· 1 port Channelized DS3
LoopStar 722
Mix of expandable and fixed ports scales from small to large customer sites
For customers anticipating growth and looking to add new services, the LoopStar 722 is an attractive option. The flexibility of a single interface slot and a series of fixed ports allows both service providers and end users to minimize their initial investment and
still respond to future needs.
With fixed ports consisting of a single SFP Gigabit Ethernet, four 10/100Base-Ts, and two T1/E1/J1s, the LoopStar 722 can be deployed in many locations even without the optional interface card. As the customer’s needs grow, the same cards used in the LoopStar 750 can be used to scale with the
services required.
LoopStar 712
Ideally suited for extending Ethernet and TDM services to single and small customer locations
The LoopStar 712 offers the complete suite of LoopStar 700 software with full support for both differentiated Ethernet or legacy services, AC or DC power options, intelligent management and a mix of connectivity
choices. When used in conjunction with the
Protected Switching Ring (PSR) technology, the LoopStar 712 can be used to build cost-effective resilient optical Ethernet rings at any size location, providing customers with the
reliability and speeds they desire.
LoopStar 711
Leveraging a full suite of Ethernet and TDM services to cost-effectively utilize fiber networks
The LoopStar 711 offers the complete suite of LoopStar 700 software, AC or DC power options, patented T1/E1 circuit emulation, intelligent management and a mix of
connectivity choices, creating a multi-service
access platform remarkably versatile for its price point. It comes equipped with two 100Base-FX ports, four 10/100Base-T ports and two T1/E1/J1 ports for circuit emulation
services.
...
- tailieumienphi.vn
nguon tai.lieu . vn