Xem mẫu
- How to Forge Email with Windows XP Telnet
Want a computer you can telnet into and mess around with, and not get into trouble no
matter what you do to it? I've set up my
techbroker.com (206.61.52.33) with user xyz, password guest for you to play with. Here's
how to forge email to xyz@techbroker.com using
telnet. Start with the command:
C:\>telnet techbroker.com 25
Connecting To Techbroker.com
220 Service ready
Now you type in who you want the message to appear to come from:
helo santa@techbroker.com
Techbroker.com will answer:
250 host ready
Next type in your mail from address:
mail from:santa@techbroker.com
250 Requested mail action okay, completed
Your next command:
rcpt to:xyz@techbroker.com
250 Requested mail action okay, completed
Your next command:
data
354 Start main input; end with .
Newbie note: just means hit return. In case you can't see that little period
between the s, what you do to end composing your email is to hit enter, type a
period, then hit enter again.
Anyhow, try typing:
This is a test.
.
250 Requested mail action okay, completed
quit
221 Service closing transmission channel
Connection to host lost.
Using techbroker's mail server, even if you enable full headers, the
message we just composed looks like:
Status: R
X-status: N
- This is a test.
That's a pretty pathetic forged email, huh? No "from", no date.
However, you can make your headers better by using a trick with the data command.
After you give it, you can insert as many headers as you choose. The trick is easier to
show than explain:
220 Service ready
helo santa@northpole.org
250 host ready
mail from:santa@northpole.com
250 Requested mail action okay, completed
rcpt to:
250 Requested mail action okay, completed
data
354 Start main input; end with .
from:santa@deer.northpole.org
Date: Mon, 21 Oct 2002 10:09:16 -0500
Subject: Rudolf
This is a Santa test.
.
250 Requested mail action okay, completed
quit
221 Service closing transmission channel
Connection to host lost.
The message then looks like:
from:santa@deer.northpole.org
Date: Mon, 21 Oct 2002 10:09:16 -0500
Subject: Rudolf
This is a Santa test.
The trick is to start each line you want in the headers with one word
followed by a colon, and the a line followed by "return". As soon as
you write a line that doesn't begin this way, the rest of what you
type goes into the body of the email.
Notice that the santa@northpole.com from the "mail from:" command didn't show up in
the header. Some mail servers would show both "from" addresses.
You can forge email on techbroker.com within one strict limitation.
Your email has to go to someone at techbroker.com. If you can find any way to send
email to someone outside techbroker, let us know, because you will have broken our
security, muhahaha! Don't worry, you have my permission.
- Next, you can read the email you forge on techbroker.com via telnet:
C:\>telnet techbroker.com 110
+OK service ready
Give this command:
user xyz
+OK user is known
Then type in this:
pass test
+OK mail drop has 2 message(s)
retr 1
+OK message follows
This is a test.
If you want to know all possible commands, give this command:
help
+OK help list follows
USER user
PASS password
STAT
LIST [message]
RETR message
DELE message
NOOP
RSET
QUIT
APOP user md5
TOP message lines
UIDL [message]
HELP
Unless you use a weird online provider like AOL, you can use these
same tricks to send and receive your own email. Or you can forge email to a friend by
telnetting to his or her online provider's email
sending computer(s).
nguon tai.lieu . vn
