Xem mẫu
- NP Series Programmable Terminal
Nguồn : hiendaihoa.com
Easy Setup with the Cost-
effective, Compact NP Series
What do you need in a NP Series?
Display visibility, information
capacity, cost effective? OMRON
provides all of these and goes further
to reduce the TCO, including
operating efficiency, by enabling
connection of various control devices,
* Ordering easy design work, and the smoothest
information possible connections.
* Specifications
* Configurations
* Dimensions,
and etc
can be found in our PDF
brochure.
NP Series Lineup
Operation Features
Transfer screens at high speed via USB port
- The USB interface lets you take full advantage of the computer
software environment. Transfer screens created on the computer
to the NP Series at high speeds.
USB Memory Stick for program upload/download
Screen data can be transferred with a USB memory stick,
eliminating the need to carry a computer to the site.
Easier On-site Operation
Models with two different function key layouts are available to
meet the needs of your application design. The NP Series case is
also available in two different colors: black or silver.
- Use the Same Equipment Worldwide with Multi-Language
support
The NP Series, screens, and Support Software are supported in
English, Chinese, many European languages, and Japanese. Also,
the NP Series meets international standards so it can be exported
or imported across country borders easily.
Hardware Features
Compact design reduces the mounting work
At 130.1 × 104.8mm (NP3:W × H), this NP Series is small enough
to be mounted in the same space as a handful of switches, and it
requires only one mounting hole in the control panel. You get less
work and a less crowded operating section.
Install in Most Environments
The front of the panel has IP65 water resistance,
allowing the NP Series to be used in environments where mist or
splashing cooling water is present.
- Compact, Yet Plenty of Information
The same data shown on NP5 can also be reflected clearly on an
NP3, without compromising the display clarity. This proves to show
the advanced display capabilities of both NP series.
Connection Features
Reduce Connection Design and Onsite Work
For Easy Maintenance without a PC
The NP Series provides an OMRON CP1L/CP1H PLC Programming
Console function, which allows users to check their PLC program
and monitor/trigger inputs/outputs.
- For Easy Development without programming
NP Series is able to connect to OMRON EJ1 Temperature
Controllers. The NP Series can be operated immediately using the
sample screens included with the NP-Designer (Support Software).
Reduced Wiring Work
The NP Series is equipped with both a RS-232 port and a
configurable RS-422A/485 port so you can connect to a PLC or
Temperature Controller with a single cable. You get reduced wiring
work and easier maintenance.
Multivendor is now available
Including OMRON and Mitsubishi, support is provided for PLCs
from major global manufacturers. The NP Series can be used with
your current PLC without redesigning the system. It doesn’t matter
if you use a different PLC manufacturer for each project.
- Multivendor List:
RS- RS- RS-
Manufacturer Series
232C 422A 485
Host Link
○ ○
C/CPM/CQM PLC
Host Link
○ ○
Omron CS/CJ/CP1/CV/CVM PLC
NT link (1: N) * ○ ○
NT link (1: 1) ○ ○
EJ1 ○
MicroLogix ○
Allen-Bradley
SLC5 ○
GE Fanuc 90 series SNP ○ ○
Keyence KV/KZ series ○
Master-K120S/200S ○
Glofa GM6 CNET ○ ○
LG (LS)
Master-K CNET ○ ○
XGT CNET ○ ○
Matsushita
Electric Works, ○
FP series
Ltd.
FX/FX2N CPU port ○
FX3U CPU port ○
Mitsubishi Electric
FX series computer link ○ ○
Corporation
A series computer link ○
A2A/A2AS/A2USH ○
- A1SH/A3N/A2ASH CPU
port
Q series CPU port ○
Q series computer link ○ ○
984 RTU/ASCII (Master) ○
RTU/ASCII Hex Address
○
(Master)
Modbus
RTU/ASCII nW and RTU
○
2W (Master)
RTU/ASCII (Slave) ○
TSX Micro (Uni-Telway)
○ ○
*
Modicon
NEZA (Uni-Telway) * ○ ○
TWIDO ○
S 7200 ○ ○
S7-300 (there to be PC
○
Siemens adapter)
S7-300 (there is no PC
○
adapter,) *
Communication
NULL NULL driver parameter is not
set
* Please refer to NP Host Connection Manual for details
Software Features
NP Designer
NP Designer is a new software dedicated for NP series models. It
- has all the advanced features and user friendly interfaces to assist
users in programming their ideal screens. From basic
lamps/switches to advanced graphic controls, the NP Designer will
compliment user’s needs to further illustrate their views of actual
conditions at sites.
Software Simulation for easy troubleshooting
NP Designer is equipped with a TEST Mode which is like a
simulation to enable users the advantage of testing their program
without actually connecting to PLC/Host, it also serves as an
excellent troubleshooting tool.
Application Examples
- Example of Applications that Provides Added Value to
Equipment
Example 1:
Example 2:
- Example 3:
- Example 4:
nguon tai.lieu . vn
