TRIM BODIES

[NX8-HELP] TRIM BODIES 1 View a topic Trim Body Split Body Trimmed Sheet Trim and Extend Trim bodies Untrim Divide Face Delete Edge 1. Trim Body Use Trim Body to trim one or more target bodies using a face or plane. You can specify the portion of the body to retain and the portion to discard. The target bodies take the shape of the trimming geometry.  You must select at least one target body.  You can select a single face, multiple faces from the same body, or a datum plane to trim the target bodies.  You can define a new plane to trim the target bodies. Where do I find it? Application Toolbar Menu Modeling Feature→Trim Body Insert→Trim→Trim Body Trim Bodies drive24ward (meslab.org/mes) [NX8-HELP] TRIM BODIES 2 1.1. Trim a solid body to a face This example shows how to trim a single, solid target body to the face of a sheet body. 1. On the Feature toolbar, click Trim Body or choose Insert→Trim→Trim Body. 2. Select the target body to trim. 3. In the Tool Option list, make sure Face or Plane is selected. 4. In the Tool group, make sure that Select Face or Plane is active. 5. Select the face of the sheet body. A vector points toward the portion of the target body to be removed. Trim Bodies drive24ward (meslab.org/mes) [NX8-HELP] TRIM BODIES 3 6. (Optional) If the vector is not pointing toward the portion of the target body you want to remove, click Reverse Direction . 7. Click OK or Apply to create the Trim Body feature. 1.2. Target Select Body Tool Tool Option Select Face or Plane Trim Body dialog box Lets you select one or more target bodies to trim. Lists the type of trimming tool to use. Appears only when Face or Plane is the tool option. Lets you select one or more faces from a body or an existing datum plane to use to trim the target bodies. Multiple tool faces must all be from the same body.  When the target is one or more solid bodies, the face trimming tool must form a complete intersection with all selected bodies.  When the target is one or more sheet bodies, the face trimming tool extends automatically along a linear tangent, and fully trims all selected sheet bodies it Trim Bodies drive24ward (meslab.org/mes) [NX8-HELP] TRIM BODIES 4 intersects, regardless of whether the intersections are complete or partial. Specify Plane Appears only when New Plane is the tool option. Lets you create a new reference plane to trim the target body. There are two ways to create a reference plane: Inferred list — Lists the methods for creating a plane. Reverse Direction Full Plane Tool – Provides additional methods to create planes in the Plane dialog box. Reverses the trim direction. 2. Split Body Use the Split Body command to split a solid body or sheet body into multiple bodies using a set of faces or a datum plane. You can also create a sketch internal to the command and either extrude or revolve it to create the splitting tool. This command creates an associative Split Body feature that appears in the history of the model. You can update, edit, or delete the feature. This command is useful in a modeling approach where multiple parts are modeled as a single part and then split as required. For example, a housing that consists of a base and a cover can be modeled as one part and split later. Split Body feature Target body Splitting plane Split Body feature Trim Bodies drive24ward (meslab.org/mes) [NX8-HELP] TRIM BODIES 5 Note  When you split a solid body using a face, the face must be large enough to cut through the body completely.  For help with creating a split body in a CAE workflow, see Split Body overview in the Advanced Simulation help.  In earlier versions of NX, the Split Body command removed all parameters from a solid or sheet body that was split. As of NX 6 this is no longer true. Bodies are no longer automatically de-parameterized when they are split. Where do I find it? Application Modeling Toolbar Menu 2.1. Feature→Trim Drop-down→Split Body Insert→Trim→Split Body Split a solid body using Extrude 1. On the Feature toolbar, from the Trim Drop-down list, select Split Body , or choose Insert→Trim→Split Body. In the Split Body dialog box, Select Body is active in the Target group. 2. In the graphics window, select one or more target bodies. ... - tailieumienphi.vn