Xem mẫu
- Coot
By Perry Bailey Copyright 2000
2. Fold up a little less
than 1/3 from the top.
White side up
1. Fold a square in half on the diagonal
one direction then fold in half on the
diagonal the other way.
NOTE: When the model is finished
there should be a flap sticking up
inside of the model you can fold 3. Fold the model in half, and
over to lock the body together. turn 90 degrees.
10. Grab the inner flap
again and bring at least
part of it back up again.
This time it doesn’t have to go
the length of the flap.
9. Grab the inner flap and reverse 4. Fold the long edge up to the
fold that puppy all the way to the top on each side.
end of flap, so it comes down even
with the bottom of the model. The finished Coot!
8. Just taking a break here to say
to mention how far the tail sticks
out all depends on step 2. 5 . Reverse fold up the neck, part of
neck is inside the body, you know the
neck is right when it touches at the
underlying layers in the front.
7. Pleat the beak in
a little for that
waterfowl look! 6. Another outside reverse
fold for the head.
nguon tai.lieu . vn