Xem mẫu

ME-430 INTRODUCTION TO COMPUTER AIDED DESIGN AUXILIARY VIEWS OF CONTROL BRACKET Pro/ENGINEER Wildfire 3.0 Dr. Herli Surjanhata PREPARING THE CONTROL BRACKET FOR DETAILED DRAWING Create a working directory and download the zip file of control bracket. Open control_bracket.prt. Create a new datum plane (DTM4) – using that pass through the axis A 1 of the hole and perpendicular to the top inclined surface of control bracket – see figure below. 1 Create another datum plane (DTM5) – using that pass through the axis A 8 of the hole and perpendicular to the right inclined surface of control bracket – see figure below. 2 Both datum planes will be used for creating partial auxiliary section views. CREATE A DETAILED DRAWING OF CONTROL BRACKET The previously C-size of drawing template will be used for detailed drawing of shaft. IMPORTANT: Be sure to copy the drawing template file you intend to use in your working directory. In this case, copy njit_c_format.frm to your working directory. 3 Pick the Create new object icon , and select Drawing from the New dialog box. Enter the name control_bracket. Uncheck the Use default template box. Click on OK. From the New Drawing dialog box, select Empty with format. Click Browse button. 4 Navigate your working directory and then select the size C drawing template format you previously customized e.g. njit_c_format.frm Note that you may save your template under different name. Open. 5 ... - tailieumienphi.vn