Logo Usage Guidelines

Logo Usage Guidelines Created January 2004 I WatchGuard®Firebox®X Logo Guidelines WatchGuard®Firebox®X Logo may be used only: ③ In connection with the Firebox X appliance only, a WatchGuard licensed product. It should not be applied to other WatchGuard Products, or used in lieu of the WatchGuard logo, on WatchGuard Corporate pieces. ③By WatchGuard channel partners/alliance partners for the sole purpose of identifying themselves as members of WatchGuard’s channel/alliance organizations. WatchGuard’s channel/alliance organizations may use the WatchGuard product and partner/alliance logos for their advertising and promotional materials while a member in good standing, subject to the terms and conditions of the applicable program or contractual agreement. Using the WatchGuard®Firebox®X Logo on Marketing Materials ③ Product Information Sheets and Brochures The Firebox X logo must appear in product brochures and product datasheets that pertain directly to the Firebox X appliance, a WatchGuard licensed product. ③ Product Advertising The Firebox X logo must appear in product advertising that pertain directly to the Firebox X appliance, a WatchGuard licensed product. ③ Point-of-Purchase Displays and Tradeshow Signage The Firebox X logo must appear in signage and POP that pertain directly to the Firebox X appliance, a WatchGuard licensed product. Using the WatchGuard®Firebox®X Logo on the Internet ③ Online Product pages or e-commerce sites If you are a WatchGuard channel partner/alliance partner, the Firebox X logo must appear on any of the pages describing the Firebox X product line, in the title only. I I WatchGuard®Firebox®X Logo Guidelines Color Usage 100m/100y > 50m/100y gradient 100m/100y 4 Color process Element Color 50% black 100% black 100m/100y > 50m/100y gradient 20% black reverse to white 100m/100y > 50m/100y gradient 2 Color spot Element Color 50% black 100% black 100% pms 485 20% black reverse to white 100% pms 485 Black & White Element Color 50% black 100% black 50% black 20% black reverse to white 20% black I I I WatchGuard®Firebox®X Logo Guidelines Clear Space A minimum amount of clear space of at least 1/8 the width of the entire logo must be maintained between the logo and other elements in order to preserve the integrity. = 1/8 of the full logo size IV WatchGuard®Firebox®X Logo Guidelines Minimum Logo Size The Firebox X logo must be sized so it is readable in its entirety. The minimum allowable size for the logo is outlined below. The Firebox X logo should be used only on Firebox X subject matter, and it must have dominance over the corporate WatchGuard logo. If the subject matter is the WatchGuard Corporation, then the WG logo should be utilized, sans the Firebox X logo. Once the above has been established, the logo should only be used in Title area’s, not in Subheads or bodycopy. For Print: Minimum height size = .50 inches | 36 points | 1.27 centimeters aligned with top of "W" .50 inches aligned with bottom of stylized "X" For Web: Minimum height size = 40 pixels | .556 inches | 40 points | 1.41 centimeters aligned with top of "W" 40 pixels aligned with bottom of stylized "X" ... - tailieumienphi.vn