Xem mẫu

  1. OptiX OSN 3500 Installation Manual Contents Contents   6  Installing the Cable Distribution Plate                                                                                                ..........................................................................................  1   Issue 05 (2006-11-20) Huawei Technologies Proprietary i
  2. OptiX OSN 3500 Contents Installation Manual Figures   Installing the cable distribution plate                                                                                                      ................................................................................................  2   ii Huawei Technologies Proprietary Issue 05 (2006-11-20)
  3. OptiX OSN 3500 Installation Manual 6Installing the Cable Distribution Plate 6  Installing the Cable Distribution  Plate About This Chapter This chapter guides you to install the cable distribution plate. One cable distribution plate is delivered with one subrack. The cable distribution plate is installed over the subrack. The following table lists the contents of this chapter. Section Description 6.1Installation Position Describes the position of the cable distribution plate in the cabinet. 6.2Installing the Cable Distribution Describes the steps to install the cable Plate in the Cabinet distribution plate 6.1  Installation Position 6.1 shows the position of the cable distribution plate in the 2200mm-high cabinet. Figure 1.1 Position for mounting ears Cable distribution plate Installation position Cable distribution plate for the lower subrack 37, 38 Cable distribution plate for the upper subrack 62, 63 Issue 05 (2006-11-20) Huawei Technologies Proprietary 1
  4. OptiX OSN 3500 6Installing the Cable Distribution Plate Installation Manual Note: The holes are numbered from bottom to top. The hole at the bottom is numbered 1. 6.2  Installing the Cable Distribution Plate in the  Cabinet Purpose This procedure guides you to install the cable distribution plate in the cabinet. Tools /Materials Cross screwdriver Cable distribution plate Prerequisites The cabinet and the subrack have been installed. Required/As needed Required Step 1 Secure the cable distribution plate into the cabinet over the subrack. See 1.1. Figure 1.1 Installing the cable distribution plate ----End 2 Huawei Technologies Proprietary Issue 05 (2006-11-20)
  5. OptiX OSN 3500 Installation Manual 6Installing the Cable Distribution Plate Issue 05 (2006-11-20) Huawei Technologies Proprietary 3
nguon tai.lieu . vn