COST ACTION E36 Modelling and simulation in pulp and paper industry Proceedings of Model Validation Workshop

ESPOO 2005 VTT SYMPOSIUM 238 COST ACTION E36 Modelling and simulation in pulp and paper industry Proceedings of Model Validation Workshop VTT SYMPOSIUM 238 Keywords: COST Action E36, parameter identification, maintenance of models, dynamic model validation, sensitivity analysis, uncertainty analysis, pulp and paper industry, wet-end chemistry, runnability, emissions reduction COST ACTION E36 Modelling and simulation in pulp and paper industry Proceedings of Model Validation Workshop Espoo, Finland, 6 October, 2005 Edited by Johannes Kappen, PTS, Germany Jussi Manninen, VTT, Finland Risto Ritala, Tampere University of Technology, Finland Organised by VTT & Tampere University of Technology, Finland ISBN 951–38–6300–X (URL:http://www.vtt.fi/inf/pdf/) ISSN 1455–0873 (URL: http://www.vtt.fi/inf/pdf/ ) Copyright © VTT Technical Research Centre of Finland 2005 JULKAISIJA – UTGIVARE – PUBLISHER VTT, Vuorimiehentie 5, PL 2000, 02044 VTT puh. vaihde 020 722 111, faksi 020 722 4374 VTT, Bergsmansvägen 5, PB 2000, 02044 VTT tel. växel 020 722 111, fax 020 722 4374 VTT Technical Research Centre of Finland Vuorimiehentie 5, P.O.Box 2000, FI–02044 VTT, Finland phone internat. +358 20 722 111, fax + 358 20 722 4374 VTT Prosessit, Lämpömiehenkuja 3 A, PL 1604, 02044 VTT puh. vaihde 020 722 111, faksi 020 722 5000 VTT Processer, Värmemansgränden 3 A, PB 1604, 02044 VTT tel. växel 020 722 111, fax 020 722 5000 VTT Processes, Lämpömiehenkuja 3 A, P.O.Box 1604, FI–02044 VTT, Finland phone internat. + 358 20 722 111, fax + 358 20 722 5000 Preface COST E36 is a European Action on modelling and simulation in the pulp and paper industry. This instrument has been established in order to promote the exchanges of scientific knowledge within the European Community. The main objective of the Action is to promote the development and application of modelling and simulation techniques in pulp and paper manufacturing processes. The main benefit will be a better understanding of the process mechanisms and their control loops. This will help to find solutions for currently pending problems in the paper industry: improving paper quality, optimising wet end chemistry, enhancing runnability and reducing emissions by improving process design, process monitoring and decision support during operation. In the long run, this action should also contribute to designing superior or new product properties. 3 ... - tailieumienphi.vn