Xem mẫu

  1. 1. 150 CÂU TRẮC NGHIỆM VỀ KIẾN TRÚC MÁY TÍNH 1
  2. 2. Which of the following statements about data and information is/are correct? c a. Data and information have an identical meaning. b. Information is generated after the processing of data. c. Information is needed to help us to make decisions. 3. Video cassette recorders (VCRs) can be programmed to start recording at a preset time. Which of the following data is/are needed? d a. The start and stop time input by users. b. The time of the internal clock of the VCR. c. Video cassette tape. d. Only (a) and (b) 4. Which of the following descriptions about data is/are correct? a a. A given set of data, when processed in different ways, can generate different information. b. Data must be consisted of digits. c. Data is a record of facts. 5. Electronic data processing. b a. is superior in term of speed and accuracy.. b. can always provide accurate and correct information. c. will always lead to an increase in operational cost of an organization. 6. Which of the followings is/are essential factor(s) to obtain accurate information? c a. Accurate data. b. An appropriate processing procedures. c. The use of electronic data processing. 7. Which of the following organizations is/are most likely to be benefited from computerization? d a. Hospitals. b. Snack shops. c. Supermarkets. d. Only (a) and (c). 8. When the resolution setting of a display unit is raised. b a. texts and images can be magnified. b. more different number of colours to be displayed. c. a larger monitor to be used. 9. The quality of a scanned image depends on. a a. the resolution of the scan. b. The number of different colours can be distinguished. c. the speed of the scanning process. 10. Dot matrix printers. d a. provide low cost printings. b. are good for printing invoices with carbon copies. c. has completely replaced by other printers due to its low printing quality. d. Only (a) & (b) 11. Inkjet printers. d a. provide a low cost solution for colour printing. b. can replace all dot matrix printers. c. require quality papers for maximum printout quality. d. Only (a) and (c) 12. Sound/speech synthesizers are commonly found in. d a. automatic telephone enquiry services. b. electronic dictionaries. c. Chinese speech recognition systems. d. Only (a) & (b) 13. Internet video conferencing requires. d a. digital cameras. b. speech synthesizing systems. c. microphones. d. All true anwser. 14. Bar codes are commonly found in. b 2
  3. a. Hong Kong identity cards. b. Supermarkets , Public libraries. c. Every computer in lab school. d. In the CDROM from manufactor. 15. Which of the following devices can be used in making computer graphics? d a. Digital cameras. b. Optical character recognition systems. c. Image scanners. d. Only (a) and (c) 16. Which of the followings are common for RAM and ROM?. d a. Their access time is much shorter than that of hard disks. b. Both of them are made of semiconductors. c. Both of them cannot store data and program permanently. d. Only (a) and (b) 17. Which of the following devices can be randomly accessed? d a. floppy disks. b. hard disks. c. magnetic tape. d. RAM 18. A computer system needs a backing storage because. d a. the price of main memory is high and its capacity is limited. b. the content in main memory is lost when the computer is powered off. c. the backing storage can be used to backup important data. d. All true anwser 19. Nowadays people prefers rewritable-CDs to floppy disks. This is because. d a. The price of rewritable CDs has become popular. b. The content in a CD is not affected by magnetic fields. c. The capacity of a CD is several hundred times larger than that of a floppy disk. d. All true anwser 20. Magnetic tapes are usually used to backup large amount of infrequently used data. Which of the following are possible reasons? c (1) The price per storage unit of magnetic tapes is lower than most backing storage media. (2) Magnetic tapes can not be accessed sequentially. Therefore, it is most suitable for backing up large amount of data which is not in frequent use. (3) Magnetic tapes are more robust than other backing storage media. a. (1) only b. (1) and (2) only. c. (1), (2) and (3). d. (2) and (3) only. 21. The following sequences shows the hierarchy of data organization from top level to the bottom. Which one of them is correct? d a. field, character, record, file. b. record, file, character, field, c. file, record, character, field. d. file, record, field, char. 22. Which of the following is not an octal number.b a. 451. b. 880. c. 325. d. 162. 23. A computer uses the 8-bit two's complement representation to represent integers. The smallest and largest integer the computer can process are.d a. -8, 7. b. -127, 127. c. -256, 255. d. -128, 127. 3
  4. 24. The main advantage of two's complement representation over that of sign-and-magnitude representation is. b a. With the same number of bits, two's complement representation can represent a wider range of integers. b. With two's complement representation, substractions can be performed by addition. c. In two's complement representation, only one bit pattern is used to represent the integer 0. d. Program designing can be simplified with the use of two's complement representation. 25. The two's complement of the bit pattern 01101101 is. b a. 11101101. b. 10010011. c. 10110110. d. 10010010. 26. How many bytes of memory locations are needed to store an English character and a Chinese character respectively? b a. one, one. b. one, two. c. two, two. d. two, one. 27. The decimal number corresponding to 0.01101(2) is.b a. 0.2031. b. 0.40625. c. 1.625. d. 0.8125. 28. Which of the following binary number is normalized? d a. 11.110111. b. 1.1111011. c. 1.01101 × 10^-11. d. 0.10111 × 10^101. 29. Which of the followings is/are handled by the Control Unit? c (1) tells the main memory whether a read or write operation is going to carry out. (2) instruction decoding. (3) send and receive control signals to and from peripheral devices. a. (2) only. b. (1) and (3) only. c. (1), (2) and (3). d. (2) and (3) only 30. Which of the following statements about the Program Counter is NOT correct?. b a. The Program Counter is a register in the Control Unit. b. The content in the Program Counter will always be increased by 1 in each instruction cycle. c. The Program Counter stores the address of the next instruction. d. There must be only one Program Counter in each CPU. 31. Which of the following sequences is a correct description of the instruction cycle? c a. Fetch - Execution – Decode. b. Decode - Fetch – Execution. c. Fetch - Decode – Execution. d. Excecution - Decode – Fetch. 32. Op-code d (1) is a part of a machine instruction. (2) represents the address of the memory location containing the required data. (3) specifies what operation is to be carried out by the computer. a. (1) only. b. (1) and (2) only. c. (1), (2) and (3). d. (1) and (3) only. 33. Which of the following signals are sent to the CPU in instruction cycles? c (1) address signals (2) machine instructions 4
  5. (3) data a. (1) only. b. (3) only. c. (2) and (3) only. d. (1) and (2) only. 34. Programs are written by low level languages.d a. occupy less storage space. b. can more easily be read and interpreted by human. c. run faster. d. Only (a) and (b) 35. Which of the following translators generate object programs? b (1) assemblers (2) compliers (3) interpreters a. (1) only. b. Only (2) c. (1), (2) and (3). d. (1) and (3) only. 36. The following statements describe the trend in the development of programming languages. Which of them is/are correct? b (1) programming languages become more structural. (2) programming languages are becoming more English-like. (3) low level languages are no longer used. a. (1) only. b. (2) only c. (1), (2) and (3) d. (2) and (3) only 37. Which of the following errors can be detected by a compiler? a (1) syntax error (2) run-time error (3) logical error a. (1) only b. (1) and (2) only c. (1), (2) and (3) d. (2) and (3) only. 38. Which of the following errors can be detected by an interpreter? b (1) syntax error (2) run-time error (3) logical error a. (1) only b. (1) and (2) only c. (1), (2) and (3) d. (2) and (3) only. 39. Which of the following strategies can reduce the amount of time the CPU spends on waiting for the peripheral devices to complete their operations? b (1) Use technique of spooling. (2) Employ a multi-tasking operating system. (3) Set peripheral devices to offline mode. a. (1) only b. (1) and (2) only c. (1), (2) and (3) d. (2) and (3) only 40. Which of the following is/are the responsibility/responsibilities of the operating system in a computer? d (1) Compile high level language programs. (2) Maintain the file structures in the hard disk. (3) Queuing print jobs 5
  6. a. (1) only b. (1) and (2) only c. (1), (2) and (3) d. (2) and (3) only 41. The dynamic address translation feature finds a program's page table through the ___________________. c a. page frame table. b. page address registers. c. page table location register. d. page base registers. 42. All of the following are commonly used output devices except __________. a a. a keyboard. b. a printer c. a monitor d. speakers. 43. __________ holds data, instructions, and information for future use. a a. Storage b. Output c. Memory d. Input 44. A __________ is a type of compact disc that has tremendous storage capacities - enough for a full- length movie. a a. DVD-ROM b. DV-RW c. CD-RW d. CVD-ROM. 45. A modem is a(n) __________. b a. small, handheld input device that contains at least one button b. communications device that enables computers to communicate via telephone lines. c. output device that looks like a television screen and displays text or graphics d. storage device that stores data using microscopic pits created by laser light 46. The user interface controls how data and instructions are __________. b a. processed and how information is communicated on a network. b. entered and how information is displayed on the screen c. entered and how information is communicated on a network d. processed and how information is displayed on the screen. 47. __________ software allows numbers arranged in rows and columns to be calculated. c a. Word processing b. Database c. Spreadsheet d. Presentation graphics 48. __________ write the instructions that direct a computer to process data into information. a a. Programmers b. Users c. Systems analysts d. Digital assistants 49. Today, the terms PC and compatible refer to any personal computer that __________. a a. is based on specifications of the original IBM personal computer b. uses the Macintosh operating system c. uses a graphical user interface d. is based on specifications of the original Apple personal computer 50. A mini-tower model computer usually is __________ inches tall. a a. 13 b. 21 c. 16 d. 24 6
  7. 51. On a typical notebook computer, the __________.a a. keyboard is located on top of the system unit, the monitor attaches to the system unit with a hinge, and the drives are built into the system unit b. monitor is located on top of the system unit, the drives attach to the system unit with a hinge, and the keyboard is built into the system unit c. keyboard is located on top of the system unit, the drives attach to the system unit with a hinge, and the monitor is built into the system unit d. drives are located on top of the system unit, the keyboard attaches to the system unit with a hinge, and the monitor is built into the system unit. 52. A __________, which looks like a ballpoint pen but uses pressure instead of ink, often is included with handheld computers for input. b a. Keyboard b. Stylus c. Mouse d. Scanner 53. __________ are capable of processing more than 12 trillion instructions in a single second and are used in applications requiring complex, sophisticated mathematical calculation. d a. Handheld computers b. Internet appliances. c. Mainframes d. Supercomputers 54. __________ is the process of obtaining a program instruction or data item from memory. a a. Fetching(nạp lệnh) b. Executing c. Storing d. Decoding 55. __________ is the process of carrying out commands. a a. Executing b. Storing c. Decoding d. Fetching 56. __________ is the process of writing the result to memory. b a. Fetching b. Storing c. Decoding d. Executing 57. Arithmetic operations __________. b a. involve matching one data item to another to determine if the first item is greater than, equal to, or less than the other item b. include addition, subtraction, multiplication, and division c. use conditions with operators such as AND, OR, and NOT d. sort data items according to standard, predefined criteria in ascending order or descending order 58. Memory stores __________. d a. the operating system and other system software that control the usage of the computer equipment. b. application programs that carry out a specific task c. the data being processed by application programs. d. All of the others answers. 59. Some manufacturers state access times in nanoseconds; a nanosecond (ns) is one __________ of a second. a a. Billionth b. Thousandth c. Millionth d. Hundredth 60. A musical instrument digital interface, or MIDI, port __________. a 7
  8. a. is a special type of serial port that connects the system unit to a musical instrument b. can connect up to 127 different peripheral devices with a single connector type c. allows wireless devices to transmit signals to a computer via infrared light waves d. is a special high-speed parallel port used to attach peripheral devices 61. A 32-bit bus can transmit __________ at a time. b a. 16 bits (32 bytes) b. 32 bits (4 bytes) c. 32 bits (16 bytes) d. 4 bits (32 bytes) 62. In most computers, the word size is __________ the bus width. a a. the same as b. either greater than or less than c. greater than d. less than 63. A local bus is __________. c a. a bus designed by Intel to improve the speed with which 3-D graphics and video transmit b. the most common and slowest expansion bus c. a high-speed expansion bus that connects higher speed devices d. a bus that eliminates the need to install cards into expansion slots 64. Similar to their desktop counterparts, notebook computers and handheld computers have a system unit that __________. d a. cannot run using a standard power supply b. usually is less expensive than desktop computers with the same capabilities c. houses devices such as the keyboard, pointing devices, speakers, and display d. contains electronic components that processes data 65. Storage devices, such as disk drives, serve as both __________ devices. b a. output and communications b. input and output c. communications and processing d. processing and input 66. Most keyboards, like that shown in the accompanying figure, have at least four __________ that are pressed to move the insertion point (xem hinh dinh kem). c a. numeric keypads b. function keys c. arrow keys d. toggle keys 67. An enhanced keyboard __________.b a. is named from the layout of its typing area b. has twelve function keys along the top, two CTRL keys, two ALT keys, and a set of additional keys between the typing area and the numeric keypad c. is a battery-powered device that transmits data using wireless technology, such as radio waves or infrared light waves d. has a design that reduces the chance of wrist injuries. 68. On notebook computers and many handheld computers, the keyboard is built into the __________. a a. top of the system unit b. front of the system unit c. back of the display d. bottom of the display 69. The __________ is the most widely used pointing device on desktop computers a a. Mouse b. Stylus c. light pen d. touch screen 70. The wheel on a mouse is rotated or pressed to __________ on the screen. b a. position the pointer b. move text and objects c. display a shortcut menu 8
  9. d. select or deselect items 71. To move the pointer using a __________, a finger is slid across its surface. b a. light pen. b. Touchpad c. digitizing tablet d. graphics tablet 72. A joystick is a __________. d a. pressure-sensitive pointing device shaped like a pencil eraser that is positioned between keys on the keyboard b. steering-wheel-type input device that is turned to simulate driving a car, truck, or other vehicle c. stationary pointing device with a ball on its top that is rotated to move the pointer d. vertical lever that is moved in different directions to control the actions of a vehicle or player 73. Digital cameras use all of the following techniques to store images except __________. b a. floppy disk and SuperDisk b. hard disk and magnetic tape c. memory stick and PC Card d. mini-CD and microdrive 74. The higher a digital camera's resolution, the __________ expensive the camera. b a. poorer the image quality, but the less b. better the image quality, but the more c. better the image quality, and the less d. poorer the image quality, and the more 75. As a rule, a 1-__________ (million pixel) digital camera is fine for screen displays such as photo communities, Web pages, and e-mail attachments. b a. Kilopixel b. Megapixel c. Gigapixel d. Millipixel 76. A DV (digital video) camera connects directly to a __________ port on a computer. a a. parallel port or USB b. serial port or USB c. parallel port or MIDI d. serial port or MIDI 77. A __________ works similarly to a copy machine except that it creates a file of the document in memory instead of a paper copy. a a. flatbed scanner b. sheet-fed scanner c. pen or handheld scanner d. drum scanner 78. A __________ guides a finger or pointing device so a user presses only one key at a time. b a. toggle key b. function key c. keyguard d. keypad 79. As shown in the accompanying figure, __________ is a type of output that consists of music, speech, or any other sound. (xem hinh) c a. a graphic or graphical image b. audio c. text d. video 80. As shown in the accompanying figure, __________ is a type of output consisting of full-motion images that are played back at various speeds. b a. a graphic or graphical image b. video c. audio 9
  10. d. text 81. Display devices include all of the following except __________. c a. Televisions b. LCD displays c. Speakers d. CRT monitors 82. Displays with higher resolution use a _________ image. c a. smaller number of pixels, providing a rougher b. smaller number of pixels, providing a smoother c. greater number of pixels, providing a smoother d. greater number of pixels, providing a rougher 83. Manufacturers state video memory in __________. b a. Kilobytes b. Megabytes c. Gigabytes d. Millibytes 84. Connecting a computer to a standard television set requires a(n) __________, which converts the digital signal from a computer into an analog signal that the television can display. b a. HDTV converter b. NTSC converter c. SVGA converter d. DDWG converter 85. Hard copy, also called a __________, can be portrait or landscape orientation. b a. Pixel b. Printout c. Display d. Video 86. __________ printers can print text at speeds of up to 40 pages per minute. c a. Dot-matrix b. Ink-jet c. Laser d. Thermal 87. Two commonly used audio output devices are __________. d a. printers and speakers b. monitors and printers c. headsets and monitors d. speakers and headsets 88. Two types of smaller, lower-cost data projectors are __________. a a. LCD projectors and DLP projectors b. CRT projectors and TFT projectors c. HPA projectors and DVI projectors d. POS projectors and ATM projectors 89. A stand-alone __________ scans an original document, converts the image into digitized data, and transmits the digitized image. d a. Headset b. Woofer c. video adapter d. fax machine 90. Examples of storage media are all of the following except __________. c a. floppy disks b. compact disks c. expansion cards d. tape 91. Storage devices access items in __________. b a. Billionths of a second (nanoseconds) b. thousandths of a second (milliseconds) 10
  11. c. millionths of a second (megaseconds) d. hundredths of a second (centiseconds) 92. In the early 1970s, __________ introduced the floppy disk as a new type of storage. d a. Intel b. Microsoft c. AT&T d. IBM 93. Computers with one floppy disk drive refer to it as drive __________. a a. A b. C c. D d. B 94. A(n) __________ floppy disk has a capacity of 1.44 MB. c a. LD (low-density) b. LC (low-capacity) c. HD (high-density) d. HC (high-capacity) 95. To maximize a floppy disk's life, avoid __________. d a. exposure to heat and cold b. magnetic fields c. contaminants such as dust, smoke, or salt air d. All of the others answers 96. A __________ is slightly larger than and about twice as thick as a 3.5-inch floppy disk and can store 100 MB or 250 MB of data. c a. SuperDisk™ b. HiFD™ disk c. Zip® disk d. Jaz® disk 97. Hard disks provide for __________ access times than floppy disks. c a. lesser storage capacities and much slower b. greater storage capacities but much slower c. greater storage capacities and much faster d. lesser storage capacities but much faster 98. If a hard disk has only one partition, the operating system designates it as drive __________b a. A b. C c. D d. B 99. The storage capacity of a __________ is more than enough to hold a telephone book containing every resident in the United States. a a. DVD-ROM b. CD-RW c. CD-R d. CD-ROM 100. __________ most often use PC Cards. a a. Notebook computers and other mobile computers and devices b. Mainframe computers and supercomputers c. Network computers and supercomputers d. Desktop computers and mainframe computers 101. During the boot process, usually the operating system will look first in drive __________ for the system files. a a. A (the designation for a floppy disk drive) b. B (the designation for a second floppy disk drive) c. D (the designation for a compact disc drive) d. C (the designation for the hard disk drive) 102. What is a binary system? a. A binary system is a two-state numbering system consisting of 0 and 1. 11
  12. b. Each 0 or 1 is called a bit (short for binary digit). c. Bits are combined into groups of eight bits called bytes. d. 0 can be represented by electricity being off and 1 by electricity being on. 103. Select valid statement? a. 8 bits = 1 byte = 1 character b. 8 bytes = 1 bit = 1 character c. 8 bits = 1 byte = 8 characters d. 8 bytes = 1 bit = 8 characters 104. There are three principal binary coding schemes is: a. ASCII - American Standard Code for Information Interchange. The most widely used binary code for microcomputers b. US. United State standard for save data and encrypt data. The most widely used in US, and for computer use Microsoft Software c. EBCDIC - Extended Binary Coded Decimal Interchange Code. Developed by IBM and primarily used on large computers. d. UNICODE - 16-bit code to support international languages like Chinese and Japanese 105. Simon is a manufacturing firm that assembles monitors from parts they purchase from the world market. They have a central office in Ottawa and 15 sales offices in Canada, USA, Asia and Europe. They have 100 employees in manufacturing, design and engineering, Information Systems, accountanting, human resource personnel etc. The quality and cost of monitors manufactured by Simon are determined by: a. size, resolution, color depth, and sharpness b. increasing energy consumption and refresh rate c. flatness of the screen 106. The factors that affect the maximum number of instructions a CPU can perform in one second are: a. Word length, data bus width and cycle speed b. Baud rate and time sharing capabilities c. The amount of RAM available 107. What is the highest binary number that can be referred to on a three position jumper block? a. 4 b. 6 c. 7 d. F 108. Which is the easiest component to environmentally recycle? a. Motherboards b. CMOS batteries c. Cathode ray tubes d. Toner cartridges 109. Which step should you perform first before discharging a CRT? a. Remove the CRT from its housing b. Disconnect the CRT from the computer c. Turn power off before removing power source d. Remove the video assembly 110. Which REQUIRES an anti-static bag for transport? a. Monitor b. Floppy disks c. I/O controller d. Power supply 111. A hard disk is divided into tracks which are further subdivided into: a. Clusters b. Sectors c. Heads d. Vectors 112. TWO primary performance restraints for mass storage devices are: a. Storage ability b. Driver aceleration c. Route mobility d. Access speed 12
  13. 113. When connecting two external SCSI hard disks to a computer, where do you connect the second hard drive? a. Any open SCSI port on the computer b. A Serial port on the first host adapter c. An open SCSI port on the first hard drive d. An open parallel port on the computer 114. When installing a SCSI CD-ROM drive, you must set the CD-ROM SCSI adapter to: a. B0007 b. An unused SCSI address c. SCSI ID=1 d. The same address as the SCSI device before the CD-ROM 115. Which provides the fastest data access time? a. RAM b. ROM c. Hard disk d. CD-ROM 116. Which controller would support an external CD-ROM drive? a. ESDI b. ARLL c. SCSI d. MFM 117. What specification covers PC hard cards? a. SCSI b. ISA c. MFM d. PCMCIA 118. Which would you have to upgrade to install an EIDE drive? a. RAM BIOS b. A 286 CPU c. ISA motherboard d. Serial board 119. Which of the following ports send / receive information to/from other devices? Select best answer. a. Mouse port, Serial port b. Serial port, Parallel port c. Parallel port, printer port d. Video port, VGA port 120. How may standard levels of interrupts are provided on the 8-bit ISA bus (XT-class computer)? a. 12 b. 16 c. 4 d. 8 121. Serial ports are assigned interrupts to avoid conflict between the ports. Which port(s) should be assigned to IRQ4? a. COM1 b. COM2 c. COM4 d. COM3 122. IRQ6 is typically reserved for: a. The floppy b. The keyboard controller c. The modem d. LPT2 123. Which specifies your hard disk configuration? a. CMOS b. WIN.INI c. CONFIG.SYS d. AUTOEXEC.BAT 124. A system has two IDE hard drives that are each divided into primary and extended partitions which drive letter is assigned to the primary partition of the second drive? 13
  14. a. C b. D c. F d. E 125. What is a common complication when adding a 1.6G IDE hard drive to an older system such as a 16Mhz 80386 system? a. The drive is too big for the available drive bays b. The old style IDE connector won't plug in properly c. System BIOS needs to be upgraded d. The power supply may be sufficient 126. During the boot process, a system first counts memory from where? a. Expansion memory board b. Video adapter c. Cache d. System board 127. The following process determines the amount of memory present, the date/time, and which communications ports and display adapters are installed in a microcomputer? a. Start-up utility test b. Power on self test c. Power on start up process d. Power up boot process 128. On a leased line installation a known good external modem shows no carrier detect light. Where is the problem most likely to be? a. In the modem b. In the phone line c. In the DTC equipment d. In the computer 129. Which best describes a fragmented hard drive: a. The platters are bad b. Data files are corrupted c. Files are not stored in consecutive clusters d. Clusters of data are damaged 130. Which components could cause a blank screen? a. Power supply b. Video card c. RAM d. CPU 131. The DC voltage on most circuit boards is: a. -12 volts b. 0 volts+5 volts c. +12 volts 132. What questions could be asked to determine if a problem is software or hardware related? (choose all that apply) a. Does the computer BEEP during the boot phase? b. Did peripheral devices initialize, i.e. printers? c. Determine how many serial ports are installed in the system. d. Will hardware components pass diagnostics? 133. Which of the following would be a logical first step in trouble shooting a PC? a. Check the computer CMOS b. Define the circumstances of the problem c. Define what applications are being used d. Call the vendor 134. Parity error usually indicate bad memory a. True b. False 135. Since nothing is in primary storage when the computer is powered off, the process of bringing part of the operating system into primary storage when the computer is powered on is called a. logging in b. loading 14
  15. c. booting d. footing 136. Instructions in a program are executed by the central processing unit in a. Sequence b. a loop c. parallel d. a decision 137. The CPU or central processing unit of a computer is organized into two main units. The two units are the control unit and the a. arithmetic unit b. logic unit c. arithmetic-logic unit d. data unit 138. A code that may someday be a standard for all computers using 16 bits is a. Morse code b. Terabyte code c. Unicode d. ASCII/EBCDIC combination code 139. Data can be represented using codes such as ASCII and EBCDIC. EBCDIC is a code with a. 4 bits b. 5 bits c. 7 bits d. 6 bits 140. The nonvolatile component of primary storage would be a. RAM b. ROM c. limited in the number of times it can be retrieved d. lost when the power to the computer is turned off 141. If you turn off the power to the computer, items stored on this device will be lost. a. primary storage b. secondary storage c. CD-ROM d. permanent storage 142. All of the following are primary storage terms except a. Memory b. internal storage c. permanent storage d. temporary storage 143. Another term for processed data is: a. processor. b. output device. c. information. d. storage. 144. Which of the following is a correct association between hardware device and component type? a. flatbed scanner – processing b. wand reader – input c. memory – output d. terminal – storage 145. The term that refers to devices that read from or write to secondary storage devices is: a. reader. b. drive. c. RAM d. processor. 146. Software that controls the computing resources, such as an operating system, is referred to as: a. custom software. b. system software. c. vertical software. d. application software. 147. In order for programmers to be able to modify a program's operations, 15
  16. a. the program must be machine-readable. b. they must purchase a site license. c. the source code must be available. d. the software cannot be copyrighted. 148. If there are several programs on a single-CPU system, which is the most likely allocation decision that the operating system will make? a. The program whose time slice has just expired will get the CPU. b. The program whose read operation has just been completed will get the CPU. c. All programs will get the CPU. d. The program that has been waiting the longest in the queue will get the CPU. 149. Which is the correct statement? a. A program's frame goes into a page of memory. b. A program's frame goes into a queue of memory. c. A program's page goes into a frame of memory. d. A program's page table goes into a frame of memory. 150. Random access memory is located in: a. registers on the CPU. b. a chip near the CPU. c. bus lines on a microprocessor. d. magnetic devices external to the computer. 151. What's the largest memory size if the addres bus of the computer system bus width is 3 bytes? a. 16 kilobytes. b. 16 megabytes. c. 64 kilobytes. d. 64 megabytes. 152. What's the decimal number the binary number 00101011 represents? a. 11 b. 31 c. 65 d. 43 153. A port provides an interface between: a. an expansion board and a peripheral device. b. an adaptor card and the motherboard. c. DRAM and SRAM. d. the CPU and L1 cache. 154. An analog video camera's interface to the motherboard is via: a. the parallel port. b. the FireWire port. c. a video capture card. d. a Web Cam port. 155. The advantage of using a graphics adapter board instead of permanently affixing graphics chips to the motherboard is: a. increased speed of raster scanning. b. easier upgrade of graphics ability. c. greater use of the system bus. d. less of a need for expansion slots. 156. When the read/write head touches the surface of a disk: a. data can be read into memory. b. data can be written to the disk from memory. c. the hard drive will stop spinning. d. data is destroyed on the disk. 157. The heat from the lasers on the surface of an optical storage disk causes: a. bit patterns to be placed on the optical disk. b. magneto-optical outputs to be generate. c. data to be copied to the hard disk. d. light beams to emit from the CDROM drive. 158. The physical parts of the computer are referred to as a. Software b. Features 16
  17. c. Programs d. Tools 159. A bit can represent how many different values? a. 1 b. 2 c. 4 d. 3 160. A byte is ___________ bit(s). a. 1 b. 2 c. 8 d. 4 15. Điều nào sau đây là phổ biến cho bộ nhớ RAM và ROM?. d a. thời gian truy cập của chúng là ngắn hơn nhiều so với các ổ đĩa cứng. b. Cả hai đều được làm từ chất bán dẫn. c. Cả hai đều không thể lưu trữ dữ liệu và chương trình vĩnh viễn. d. Chỉ có (a) và (b) 16. thiết bị Nào trong các thiết bị sau đây có thể được truy cập ngẫu nhiên? d a. ổ đĩa mềm. b. ổ đĩa cứng. c. băng từ. d. RAM 17. Một hệ thống máy tính cần một lưu trữ sao lưu vì. d a. giá của bộ nhớ chính là cao và khả năng của mình bị hạn chế. b. nội dung trong bộ nhớ chính là bị mất khi máy tính tắt. c. lưu trữ sao lưu có thể được sử dụng để sao lưu dữ liệu quan trọng. d. Tất cả anwser đúng 18. Ngày nay những người thích ghi lại-CD cho đĩa mềm. Điều này là do. d a. Giá của các đĩa CD ghi lại đã trở thành phổ biến. b. Các nội dung trong đĩa CD là không bị ảnh hưởng bởi từ trường. c. Năng lực của các đĩa CD được vài trăm lần lớn hơn so với một đĩa mềm. 17
  18. d. Tất cả anwser đúng 19. băng từ thường được sử dụng cho số lượng lớn các sao lưu dữ liệu thường xuyên được sử dụng. Điều nào sau đây là lý do có thể? c (1) Giá cho mỗi đơn vị lưu trữ băng từ tính thấp hơn so với hầu hết các phương tiện lưu trữ sao lưu. (2) băng từ tính không thể truy cập tuần tự. Vì vậy, nó là thích hợp nhất để sao lưu lượng lớn dữ liệu mà không sử dụng thường xuyên. (3) băng từ có trở nên mạnh mẽ hơn so với phương tiện lưu trữ khác ủng hộ. a. (1) chỉ b. (1) và (2) chỉ. c. (1), (2) và (3). d. (2) và (3) chỉ. 20. Các trình tự sau đây cho thấy các hệ thống phân cấp của tổ chức dữ liệu từ cấp trên xuống dưới này. Mà một trong số đó là chính xác? d a. trường, nhân vật, hồ sơ, tập tin. b. ghi lại, tập tin, nhân vật, lĩnh vực, c. tập tin, hồ sơ, nhân vật, lĩnh vực. d. tập tin, hồ sơ, lĩnh vực, char. 21. Điều nào sau đây không phải là một number bát phân.b a. 451. b. 880. c. 325. d. 162. 22. Một máy tính sử dụng 8-bit của hai bổ sung đại diện để đại diện cho số nguyên. Các số nguyên nhỏ nhất và lớn nhất máy tính có thể quá trình are.d a. -8, 7. b. -127, 127. c. -256, 255. d. -128, 127. 23. Ưu điểm chính của hai đại diện của bổ sung so với các dấu hiệu và độ lớn là đại diện. b a. Với cùng một số bit, hai đại diện của bổ sung có thể đại diện cho một phạm vi rộng hơn các số nguyên. b. Với hai đại diện bổ sung của, substractions có thể được thực hiện bằng cách bổ sung. c. Trong hai của đại diện bổ sung, chỉ có một mẫu bit được sử dụng để đại diện cho số nguyên 0. d. Chương trình thiết kế có thể được đơn giản hóa với việc sử dụng các đại diện bổ sung hai của. 24. Của hai bổ sung các mẫu bit 01101101 được. b a. 11101101. b. 10010011. c. 10110110. d. 10010010. 25. Làm thế nào nhiều byte của vị trí bộ nhớ là cần thiết để lưu giữ một ký tự tiếng Anh và một ký tự tương ứng của Trung Quốc? b a. một, một. b. một, hai. 18
  19. c. hai, hai. d. hai, một. 26. Các số thập phân tương ứng với is.b (2) 0,01101 a. 0,2031. b. 0,40625. c. 1,625. d. 0,8125. 27. Nào trong các số nhị phân sau đây là bình thường? d a. 11,110111. b. 1,1111011. c. 1,01101 × 10 ^ -11. d. 0,10111 × 10 ^ 101. 28. Điều nào sau đây là / được xử lý bởi các đơn vị kiểm soát? c (1) cho bộ nhớ chính có một đọc hoặc viết hoạt động sẽ thực hiện. (2) hướng dẫn giải mã. (3) gửi và nhận tín hiệu điều khiển đến và đi từ các thiết bị ngoại vi. a. (2) chỉ. b. (1) và (3) chỉ. c. (1), (2) và (3). d. (2) và (3) chỉ 29. Mệnh đề nào sau đây về các Chương trình truy cập là không chính xác?. b a. Việc truy cập Chương trình là một đăng ký tại các đơn vị kiểm soát. b. Các nội dung trong Chương trình truy cập sẽ luôn luôn được tăng 1 trong mỗi chu kỳ chỉ thị. c. Chương trình truy cập các cửa hàng địa chỉ của lệnh tiếp theo. d. Có phải là chỉ có một chương trình truy cập trong mỗi CPU. 30. Nào trong các trình tự sau đây là một mô tả chính xác của chu kỳ chỉ dẫn? c a. Fetch - Thi - Giải mã. b. Giải mã - Fetch - Thi. c. Fetch - Giải mã - Thi. d. Thực hiện - Giải mã - Fetch. 31. Op-mã d (1) là một phần của một chỉ dẫn máy. (2) đại diện cho địa chỉ của các vị trí bộ nhớ có chứa các dữ liệu cần thiết. (3) chỉ ra hoạt động sẽ được thực hiện bởi máy tính. a. (1) chỉ. b. (1) và (2) chỉ. c. (1), (2) và (3). d. (1) và (3) chỉ. 32. Trong đó các tín hiệu sau đây được gửi đến CPU trong chu kỳ chỉ dẫn? c (1) các tín hiệu địa chỉ (2) hướng dẫn máy (3) dữ liệu a. (1) chỉ. b. (3) chỉ. c. (2) và (3) chỉ. d. (1) và (2) chỉ. 33. Chương trình được viết bởi các trình độ thấp languages.d a. chiếm không gian lưu trữ ít hơn. 19
  20. b. có thể dễ dàng được đọc và giải thích của con người. c. chạy nhanh hơn. d. Chỉ có (a) và (b) 34. Nào trong các dịch giả sau đây tạo ra các chương trình đối tượng? b (1) lắp ráp (2) compliers (3) phiên dịch a. (1) chỉ. b. Chỉ có (2) c. (1), (2) và (3). d. (1) và (3) chỉ. 35. Các báo cáo sau đây mô tả các xu hướng trong sự phát triển của ngôn ngữ lập trình. Những người trong số họ là / là chính xác? b (1) ngôn ngữ lập trình trở nên cấu trúc. (2) ngôn ngữ lập trình đang trở nên giống như tiếng Anh. (3) ngôn ngữ cấp thấp không còn được sử dụng. a. (1) chỉ. b. (2) chỉ c. (1), (2) và (3) d. (2) và (3) chỉ 36. Nào trong các lỗi sau đây có thể được phát hiện bởi trình biên dịch không? một (1) lỗi cú pháp (2) thời gian chạy lỗi (3) lỗi logic a. (1) chỉ b. (1) và (2) chỉ c. (1), (2) và (3) d. (2) và (3) chỉ. 37. Nào trong các lỗi sau đây có thể được phát hiện bởi một thông dịch viên? b (1) lỗi cú pháp (2) thời gian chạy lỗi (3) lỗi logic a. (1) chỉ b. (1) và (2) chỉ c. (1), (2) và (3) d. (2) và (3) chỉ. 38. Mà trong những chiến lược sau đây có thể giảm số lượng thời gian CPU mất thời gian chờ đợi cho các thiết bị ngoại vi để hoàn thành các hoạt động của họ? b (1) Sử dụng kỹ thuật của đồng tác. (2) Sử dụng một hệ điều hành đa nhiệm. (3) Thiết lập các thiết bị ngoại vi để chế độ offline. a. (1) chỉ b. (1) và (2) chỉ c. (1), (2) và (3) d. (2) và (3) chỉ 39. Điều nào sau đây là / là trách nhiệm / nhiệm vụ của hệ điều hành trong một máy tính? d 20
nguon tai.lieu . vn